First Start of our 1500WHP Texas Speed LS V8 In a Huracan!

공유
소스 코드
  • 게시일 2019. 10. 16.
  • In today's episode we're starting this damn thing up! Huge thanks to www.texas-speed.com/ for sponsoring us with such a bitchin engine, and haltech.com for the ECU and help operating the ECU to get us over the final hump.
    ❱ Shop - bisforbuild.com/
    ❱ Patreon - www.patreon.com/user?u=3364742
    ❱ Facebook - / bisforbuild
    ❱ Instagram - / bisforbuild
    ❱ Twitch - / bisforbuild
    Music:
    Fareoh - Cloud Ten
  • 자동차

댓글 • 2K

  • @ramzdrums
    @ramzdrums 4 년 전 +703

    The fact that when you make mistakes and how you document/talk about them is a big reason why I love your channel. You don't hide them, or make excuses, you say what happened and you fix it. Everybody makes mistakes. But not everybody admits it. Keep doing B is for Build things, I'm so excited to see this frankenlambo at the end!

    • @randyg5076
      @randyg5076 4 년 전 +8

      Except the raptor front suspension. That was dangerous...

    • @xnadave
      @xnadave 4 년 전 +2

      Agreed, and well said.

    • @Vgk36
      @Vgk36 4 년 전 +28

      @@carlos2003177 let's see your builds Keyboard commando.
      The fuck outta here you squid.
      You ain't ever done nothin in your life remotely as complicated as some of the stuff he's done on this channel.

    • @mazetv5384
      @mazetv5384 4 년 전 +6

      VGK30 with you on that comment bro

    • @jaunie_2144
      @jaunie_2144 4 년 전 +7

      @@carlos2003177 My, who shit your cereal mate.

  • @teleporterendekapitein7599

    Maybe send the exhaust manifold over to a company to replicate them in a thick metal so you can focus on the body and paint.

    • @ANDREWSAMY562
      @ANDREWSAMY562 4 년 전 +23

      Thank you

    • @gsppuffer
      @gsppuffer 4 년 전 +64

      Metigulous maybe fly him out or send then to him to rebuild

    • @anthonyray5515
      @anthonyray5515 4 년 전 +15

      www.motor1.com/news/376797/youtuber-resurrects-burnt-lambo-huracan/

    • @brandoncaldwell95
      @brandoncaldwell95 4 년 전 +17

      Exactly. Quick and simple. They focus on the car and have another company rebuild it.

    • @NickKautz
      @NickKautz 4 년 전 +137

      The headers aren't the problem , there's too much fuel or the timing is retarded. EGTs shouldn't be anywhere near high enough to cause glowing headers at low rpm or idle.

  • @BillabongRW
    @BillabongRW 4 년 전 +582

    My exhausts glowed like yours. They were almost See through they were that hot! In my case it was the fuel/air mixture I overlooked the carb settings the mixture was too lean Once I corrected that everything was fine. Like yours mine glowed very quickly. Hope this helps.

    • @serpuns7409
      @serpuns7409 4 년 전 +13

      ^^

    • @PSNxFTWxRAGOI
      @PSNxFTWxRAGOI 4 년 전

      I ran my quad for less than 15sec with a vaccum leak and the header was glowing red

    • @sneekydart7359
      @sneekydart7359 4 년 전

      Certain engines also seem to get red hot manifolds when they're in neutral, this could be the issue?

  • @sixpents
    @sixpents 4 년 전

    This has been an amazing transformation to watch. I don’t personally care what the time frame this car is completed in. Just reviving this burnt to a crisp Lamborghini into a LS wide-body beast is what watching this build is all about. This is honestly amazing to watch and thank you for having the perseverance, ingenuity and imagination to get a build like this done from start to finish.

  • @nathanasad2908
    @nathanasad2908 4 년 전 +813

    CHRIS!!! There is also a chance that the manifolds are glowing from running really lean. Not sure what your afr's are looking like, but its something to consider.
    Like so he can see!!

    • @VasilyBuilds
      @VasilyBuilds 4 년 전 +17

      Right, also thin metal relieves heat faster

    • @JR-.-.
      @JR-.-. 4 년 전 +7

      But he was running way rich, I don't think it was lean.

    • @kain0m
      @kain0m 4 년 전 +23

      My money is also on it running lean. Thicker metal will not stop them from glowing.

    • @dopeass791
      @dopeass791 4 년 전 +16

      Timing is way off

    • @PANTA-Music
      @PANTA-Music 4 년 전 +9

      I just wonder, shouldn't that be visible on the software?

  • @babypinkbean
    @babypinkbean 4 년 전 +446

    The FRAM sponsorship almost killed me 😂😂😂 im weakk nice one

  • @5am_mills
    @5am_mills 4 년 전 +1

    I’ve been watching you for a year now and love how technical you and you friends work. You guys work as a great team, learning from each other and showcasing your work. This is awesome

  • @zingbat4
    @zingbat4 4 년 전 +142

    This feels more like an egt issue that a manifold material issue. Get an egt probe.

    • @sigmaprojects
      @sigmaprojects 4 년 전

      agreed, thus the bung on the manifold for the EGT probe.

  • @CoolTiger92
    @CoolTiger92 4 년 전 +293

    Just a idea, take manifolds off and make a jig and out source the manifolds keeps you on track

    • @carresurrection8138
      @carresurrection8138 4 년 전 +42

      There isn't an issue with the manifold, the problem is that the cars timing is way too retarded. When the timing is that retarded the combustion event is still happening when the exhaust valve opens, which means a lot of the combustion is taking place in the exhaust. You can even see flames coming out of the exhaust. He just needs to time the engine correctly.

    • @carresurrection8138
      @carresurrection8138 4 년 전 +17

      The correct DIY to time it with the welding rod is to turn the crank one way, find when the rod hits tdc, turn the crank from the other direction, to when it just hits tdc. Then split the difference. The piston can dwell at the top of TDC for 5-10 degrees.

    • @Scott_G
      @Scott_G 4 년 전 +1

      Similar to the method he used when he created the suspension on the M5 240Z?

    • @A0SAirsoft
      @A0SAirsoft 4 년 전

      This

    • @hondacota4rt
      @hondacota4rt 4 년 전 +9

      @@carresurrection8138 I'm pretty sure he would rather have flames coming out the exhaust instead of a well running car....

  • @mycool8980
    @mycool8980 4 년 전 +109

    It be a good idea to prioritise some heat shielding.

  • @TSCrihfield
    @TSCrihfield 4 년 전 +1

    Love that the humor hasn’t stopped. Keep smiling. It’ll work out.

  • @t2fast
    @t2fast 4 년 전 +31

    My Grandpa, rest his soul, told me when I built my first engine "Break it in like your going to be running it." That is how he did all of his race engines and they ran like beast.

  • @silvenshadow
    @silvenshadow 4 년 전 +50

    The deadlines and timelines are a lot of what fuels you! I know the pressure has got to be crazy right now, but look at what's in your garage man! And it runs! You've got to be proud. This build is awesome.

  • @Risinex
    @Risinex 4 년 전 +13

    I love it when Chris keeps the human element in his videos! A lot of other channels edit out or don't talk about their short comings. This is why BiFB is my favorite automotive youtube channel

  • @goldenace716
    @goldenace716 4 년 전 +5

    Omg six days since this video was posted and I've been craving for the next one. Hurrryyyy!!

  • @BGCoop79
    @BGCoop79 4 년 전

    Bro, LOVE the mirror image turbos. Wish more builds were like this. To me, twin turbos look WAY better when they mirror each other vs going the same direction. Hats off you you guys for making that work!!

  • @bradrad2019
    @bradrad2019 4 년 전 +70

    Chris, you had me with that Fram advertisement. I almost put my Truly back.

  • @Matty.Hill_87
    @Matty.Hill_87 4 년 전 +139

    Listen to those wutang war whistles and that's just at idle.. she's going to sound so mean

  • @dylaneagleton3090
    @dylaneagleton3090 4 년 전 +14

    Definitely air fuel mixture having a lean hot burn because it isn’t tuned making the manifolds glow

  • @hhha310
    @hhha310 4 년 전

    From 10k subs to 1.2 mil subs is a very very satisfying thing to see. Im happy to see the progress as a channel and progress as a content creator. Keep it goin B

  • @leighsponger
    @leighsponger 4 년 전 +157

    Oh man my heart break for you Chris, I just can’t see this getting done in 20 days, please don’t rush it, if you don’t make it than you don’t make it, but don’t rush it and take short cuts...
    Best of luck bro, rooting for you

    • @super_slo
      @super_slo 4 년 전 +19

      Worst case, that's why he bought a car trailer, right? It already looks mean, and is a decent showcase for the turbos - even if it's not quite race ready. Better smart and safe than sad and sorry.

    • @stance_fb
      @stance_fb 4 년 전 +8

      This wont set him back as bad as it seems, as long as he utilizes his time he has other areas to work on if someone else can help with the manifolds

    • @chipanzee7507
      @chipanzee7507 4 년 전 +4

      So in his last instagram post he said that this was the video coming out, but lots else has happened. We can only hope it's much further along and lots of the way done.

    • @JasonSchoeman
      @JasonSchoeman 4 년 전 +1

      Agree, just take it half build. It will be ok and people will love to see it. It's already a success. Just build it properly, don't rush then mistakes are made.

    • @Baldhengarage
      @Baldhengarage 4 년 전 +2

      I don't think you realize how sponsorships work lol he literally has to make it no matter what

  • @jacobchapman5311
    @jacobchapman5311 4 년 전 +103

    First comment I’ve ever made on a KRplus video. Chris, this project is bigger than a SEMA deadline, you have over a million people engaged and excited in this build. We are all behind you and respect the way you go about your builds, most of all the mistakes you make. Best channel on KRplus, period.

  • @therusticrose2097
    @therusticrose2097 4 년 전

    This is when the 36-48 start happening. I have faith you guys will pull it altogether in time. I’m rooting for you.

  • @vsho
    @vsho 4 년 전

    I'm glad you added the fuse! 2 weekends ago, a buddy of mine, against my recommendation decided to run a turbo integra melting all the wires to the starter, damaging the starter and also electrocuting himself and almost set everything including the garage on fire!... He's ok thankfully, needless to say the cables have all been upgraded and a fuse has also been set. Better safe than sorry, and sometimes the dumbest things cause the biggest issues! Anyways love the build, soo excited to see it all come together!

  • @Bababoui1000
    @Bababoui1000 4 년 전 +220

    Send the manifolds out to be replicated in thicker metal.

    • @dopeass791
      @dopeass791 4 년 전 +5

      There is a bigger issue here.

    • @cervic-mm8ri
      @cervic-mm8ri 4 년 전 +1

      Genius

    • @bbeckers24
      @bbeckers24 4 년 전 +1

      Was thinking the same thing... Might want to consider titanium.

    • @dopeass791
      @dopeass791 4 년 전 +3

      It should not glow like that at idle. It's not the thickness.

  • @jsip01
    @jsip01 4 년 전 +43

    I can honestly say I’m so invested in this build. I love the work you’re doing. I look forward to update videos every week. Good stuff!

    • @hinds90
      @hinds90 4 년 전 +1

      It really is a great time. Years ago I was apart of several different car forums and always followed builds. This is just the new incarnation of that.

  • @aaronshagar
    @aaronshagar 4 년 전

    Great job my man! This is the tradition of the SEMA crunch, this is where you will really shine and your ingenuity will be at it’s purist! Stay focused! You’ll get there! And we will all be cheering in your corner! See you at the big show!

  • @JDMJDK
    @JDMJDK 4 년 전

    Build, build, build! The manifolds will get finished. Keep moving forward Chris, we know you guys can do this.

  • @joealex65
    @joealex65 4 년 전 +401

    Use AC Delco oil filters, if i'm not wrong they are the recomended ones for the LS engines by GM

    • @Joshua-zy1tf
      @Joshua-zy1tf 4 년 전 +21

      Everyone like so Chris can see.

    • @zacharyhill240
      @zacharyhill240 4 년 전 +41

      @@Joshua-zy1tf ac delco are made by gm. thats why they recommend them. but wix are exceptionally great filters. way bwtter than royal purple and k&n

    • @Auszug21
      @Auszug21 4 년 전 +10

      quite frankly anytime you have recommended parts by the manufacturer it's mostly just a marketing ploy to sell those parts. similar to OEM spec parts they want to sell you there parts so the money goes to them instead of a third party. in most cases it has nothing to do with performance.

    • @freqvent
      @freqvent 4 년 전

      Zachary Hill agree with you there. Wix are good quality, I peel my filters back every oil change on my high mile Honda daily just to know what’s going on, the smallest specks of anything get caught.

    • @quick455
      @quick455 4 년 전 +4

      Except Delco filters are actually a very quality filter in this case.

  • @fopeezy3097
    @fopeezy3097 4 년 전 +73

    That was a Rich-Rebuilds quality troll at the beginning... well done.

  • @nandarnurdiana3011

    After waiting for months, I finally answered I was curious about all the car projects that you built, hope all problems are resolved. Good job.

  • @siimverlin7457
    @siimverlin7457 4 년 전

    You can do it Chris, Oscar and B is for Build team!
    All the support from Estonia

  • @DigitalPhysicianEHR
    @DigitalPhysicianEHR 4 년 전 +204

    Oil filter recommendations:
    Literally anything but fram.
    Try Wix, puralator pureone, etc

    • @Naevak.
      @Naevak. 4 년 전 +4

      napa gold is good too but its made by the same company as wix so like only minimal increase in quality

    • @kevinhibbard320
      @kevinhibbard320 4 년 전 +8

      Wix ftw, the amsoil filters are nice too.

    • @DarkRider2k3
      @DarkRider2k3 4 년 전

      Been running Purolator filters on all my cars and love them.

    • @superchargedregal
      @superchargedregal 4 년 전

      Definitely wix

    • @VasilyBuilds
      @VasilyBuilds 4 년 전 +2

      K&n

  • @joealex65
    @joealex65 4 년 전 +76

    Chris must feel like a mad scientific screaming *"IT'S ALIVE!!!"* 🔥🔥🔥

  • @nicolasboivin9746
    @nicolasboivin9746 4 년 전

    All hail the king! Man Chris I wish I had your level of perseverance... I would probably have quit 3 minutes inside this episode. Great work from you and team... I started watching you when you did the z4 build with Tavarish and since then you’ve been one of my favorite KRplusr

  • @scottthompson13
    @scottthompson13 4 년 전

    You guys are doing great for such a big project. I like how you spotted the water header air pocket issue. I'm hoping to see all your charge pipes secured at each connection with clamps before you hit the dyno. Good luck guys

  • @ArmandoRodriguezJr
    @ArmandoRodriguezJr 4 년 전 +4

    Also, my experience with the battery being away from the motor is it's best to have a negative power cable from the battery directly to a grounding point on the engine block. This will help with full potention for fuel ignition when at full boost/high RPM's.

  • @tjyuca4849
    @tjyuca4849 4 년 전 +34

    When chris said it was sponsored by fram lmaooo i died 🤣🤣

  • @was920
    @was920 4 년 전

    Coolant does lower the boiling point slightly under pressure. Always good to have some in the system. Also helps the cooling system to not become conductive as fast.

  • @tannermitchell2108
    @tannermitchell2108 4 년 전 +7

    "The last hiccup that we have, if you're still watching thank you". Yes sir I'm still watching and still waiting and wishing I could help haha

  • @zahidyusuf6652
    @zahidyusuf6652 4 년 전 +31

    you guys got a mention on the Top Gear website :)

  • @novaracer2000
    @novaracer2000 4 년 전 +225

    The problem is the tune, not the tubing thickness.

    • @dopeass791
      @dopeass791 4 년 전 +16

      Timing

    • @ludvigad
      @ludvigad 4 년 전 +8

      @@dopeass791 which is controlled by the tune in the ecu. They checked the timing, but 5 degrees or so off wouldn't heat the manifold that much. The spark timing is set too late in the base map. Also, the seems to be a shift between the banks since they didn't comment on the left bank. Could potentially be the exhaust cam set to open too early on the right hand bank.

    • @dopeass791
      @dopeass791 4 년 전 +12

      @@ludvigad you realize this is a single cam engine right? That would mean the cam is a faulty grind.

    • @ludvigad
      @ludvigad 4 년 전 +3

      @@dopeass791 yes, you're right, my bad. Was thinking way too much DOHC, haha. Yeah, that would be one weird cam to produce that shift to one exhaust bank...

    • @dopeass791
      @dopeass791 4 년 전 +4

      @@ludvigad Yeah haha no worries. It Will probably be okay if they just tune it.

  • @deathflame66
    @deathflame66 4 년 전

    Keep pushing, rest smart. It's going to get done, you've got this! It starts and sounds awesome! That is progress!

  • @YusufPetersenCPT
    @YusufPetersenCPT 4 년 전 +2

    "Break it in hard or its gonna be a whoos".. Words to live by there.

  • @technologyandsound32
    @technologyandsound32 4 년 전 +89

    it can't be just me that notices that the exhaust is crooked 4:51

    • @collincurtis5024
      @collincurtis5024 4 년 전 +7

      Technology and sound 32 it’s not fully connected yet

    • @spedracer55
      @spedracer55 4 년 전 +1

      its honestly irritating

    • @843idfa
      @843idfa 4 년 전 +1

      It’s Mad Max’s car, what do expect?

  • @jesusmartinez-lz6dr
    @jesusmartinez-lz6dr 4 년 전 +6

    It's not about the fans, it's about the sponsors for him to meet his sema deadline

  • @Korruptionen
    @Korruptionen 4 년 전

    This thing is coming together nicely. This is a very daring build, especially on the timeline you're shooting for. Hope you get there!!

  • @awesomebob517
    @awesomebob517 4 년 전

    Literally anything else. My personal favorite is the WIX XP filter, I do an oil change every 5,000 miles and it’s still brown. The regular WIX is still a solid filter.

  • @90sninetiesmaragh2
    @90sninetiesmaragh2 4 년 전 +5

    The timing is the major factor in the glowing manifold

  • @davidthompson1003
    @davidthompson1003 4 년 전 +24

    CALL JON AT DOC RACE!!! He’s in your backyard!

  • @markspence3295
    @markspence3295 4 년 전

    Keep going mate, don't be discouraged by the odd set back. You're doing amazing.

  • @PixelatedAussie
    @PixelatedAussie 4 년 전

    Stay positive man! It was amazing to hear the engine, and hot damn does it sound like a beast! It has been an amazing honest journey so far, and I think you guys can get this done for SEMA!

  • @pmagnone2488
    @pmagnone2488 4 년 전 +9

    Always watch immediately no matter what I’m doing

    • @aaronanderson8769
      @aaronanderson8769 4 년 전

      peter Magnone same

    • @6.7de92
      @6.7de92 4 년 전 +1

      @Lumer hahaha, it's home time for me on the couch sipping on a cold truly. Safe travels driver

  • @kimandrebjrndal4914
    @kimandrebjrndal4914 4 년 전 +3

    Im in heaven at the moment. I got so mutch amazing content to watch. B is for build with this lamborginini, Rob dahm with his billett 4 rotor, Robbie fierra finaly is working on his brz again and he is going to boost it, tj Hunt Made a videbody Kit for the 2020 supra and Adam lz Just started a New build 😍

  • @marquisethomas5611

    Everybody that watches this channel knew you werent gonna make it to sema, we were just happy that they put pressure on you so we got more videos faster

  • @troylinden369
    @troylinden369 4 년 전

    I screamed at the fram bit! Wix or Napa filters are the best imo.

  • @eddie_8317
    @eddie_8317 4 년 전 +6

    Lmao! That fram sponsorship had me laughing. 😂👍

  • @cameronmiller5886
    @cameronmiller5886 4 년 전 +32

    Take your manifolds to a professional shop and they will whip it out real quick while you progress on something else

  • @brendanmull
    @brendanmull 4 년 전 +1

    Call Driven Racing Oils and use whatever filter they tell you. It still won't be a Fram!
    Cooling system issue...there's almost no way you didn't have an air pocket in your cooling system with that setup. The system will "boil over" as that air escapes. Pretty normal on certain cooling systems on even OEM vehicles when completely filling them. The coolant will boil when when it shows the temps are normal because there will be spots in the system that are much hotter than what the sensor reads as the system is purged. But it's ok... usually happens once and then you top it off with coolant. You're good to go. Congrats guys!

  • @williamtrembley2046

    What volume is your coolant system? Water does actually expand when heated. For example 5 gallons expands to about 5.3 gallons for a temperature change from 75 F to around 220 F. You would need an expansion tank for the volume change. Pressurizing it prevents boiling, but does not prevent thermal expansion. It needs an air or steam bubble to act as a kind of shock absorber, just keep the bubble at the high point in the system.

  • @paulferrante9581
    @paulferrante9581 4 년 전 +17

    Use amsoil everything. Amsoil filters and all lubricants

    • @splixsky
      @splixsky 4 년 전

      Paul Ferrante he’s getting sponsored by motul tho

  • @shialabeouf4111
    @shialabeouf4111 4 년 전 +18

    B is for build: *Gets Drunk*
    Subtitles: Beers for Build

  • @joshmaddox5682
    @joshmaddox5682 4 년 전

    Dude you swing for the fences this build is amazing your an inspiration to a lot people

  • @Marts1499
    @Marts1499 4 년 전

    I own an old Jeep xj with an ls swap. It’s a rock crawler and consistently abused and driven really hard. The only filters I use are k&n they are nice and big and if ever you have cut one open ya know they are super well built

  • @fkdob2000
    @fkdob2000 4 년 전 +9

    My first thought was from young Frankenstein "It's ALIVE!!"

  • @rodpalm6398
    @rodpalm6398 4 년 전 +3

    You will want to take that ground cable from the - terminal on the battery to one of the starter motor mounting bolts.

  • @HamzaFaruqui
    @HamzaFaruqui 4 년 전

    No reason to be bummed out.
    This is classics B is for Build. That's why this channel is great.

  • @CrazyCowboyBuilds
    @CrazyCowboyBuilds 4 년 전

    Man Chris, I feel your pain of obstacles and delays. If building was easy everyone would have an awesome custom built car. My Murci has taken so much longer than I expected.... ALWAYS REMEMBER to find the opportunity to grow in difficulty.

  • @joshuaavila8317
    @joshuaavila8317 4 년 전 +5

    Man I'm loving this ls swapped lambo that's what I like to see

  • @kevinalon5229
    @kevinalon5229 4 년 전 +176

    “It smells like success” Oscar-2019

  • @budslife
    @budslife 4 년 전

    You are building a awesome car can't wait to see it done. Great work!

  • @robertdavies922
    @robertdavies922 4 년 전

    The ambition in this project is awesome 👌

  • @madmax2069
    @madmax2069 4 년 전 +14

    Usually when priming the engine of oil you should remove the spark plugs so that the engine can spin freely. makes things a lot easier, especially on the starter.

    • @Dracuz123
      @Dracuz123 4 년 전 +1

      Why bother, it takes a lot of time to remove 8 sparkplugs just for 30s of cranking

    • @Dracuz123
      @Dracuz123 4 년 전 +4

      @Peter Lee engine is freshly rebuild, so there is most likely some kind of assembly oil on it

  • @dangelo182
    @dangelo182 4 년 전 +64

    WIX synthetic oil filter over any generic brand period

    • @Dmanpeterson
      @Dmanpeterson 4 년 전 +5

      D'angelo O or NAPA filters, they are made by WIX as well. So totally agree with you.

    • @kelmm568
      @kelmm568 4 년 전 +2

      Wix for sure

    • @ruikazane5123
      @ruikazane5123 4 년 전 +2

      It is break in. No use on going expensive on oil that will be disposed of within weeks

    • @ThePizzaGuy1396
      @ThePizzaGuy1396 4 년 전 +3

      @@ruikazane5123 you can get a napa gold (aka wix filter) for like $7. well worth it over the orange can of death

    • @Pheatan
      @Pheatan 4 년 전 +4

      @@ruikazane5123 its absolutely worth using good oil and filters on a break in. It's probably the most important place to be using good oil

  • @fanklinwalker8216
    @fanklinwalker8216 4 년 전

    come on dude you got this in the bag cooling fan in the front antifreeze you did all the pressure testing man this is awesome this is rad I believe that you can make it to Sema.. I wish you all the luck

  • @awdken6
    @awdken6 4 년 전

    You're killing it on this build. Its awesome to see it all, good and bad.

  • @gizmouk2001
    @gizmouk2001 4 년 전 +44

    Much like some of the other comments on here, It may be that your running far too lean, the fact that the manifold on each cylinder is glowing at different levels would also suggest this. by looking at your exhausts while running, the left side looks much richer, so if each exhaust is not glowing the same then you can definitely manage the exhaust temperatures by adding fuel where its needed.
    Yes the material is thin so will likely eventually crack, and I would absolutely suggest moving to some schedule 10 tubing...
    But there is no reason you should not be able to perfect the map and run it through the dyno, for road use you could even run a little rich for the time being, just heat wrap them manifolds and get it through SEMA.

  • @cleric751
    @cleric751 4 년 전 +25

    Please add a General Motors "Texas Edition" logo on the lambo.

    • @dookiebooger9967
      @dookiebooger9967 4 년 전 +2

      Just swap the lambo badges with Chevy bowties

    • @leethomas1776
      @leethomas1776 4 년 전 +1

      @@dookiebooger9967 Lambolet

    • @karter9907
      @karter9907 4 년 전

      @@leethomas1776 put an LS in a Toyota.....
      Result: Toyolet.....😂

  • @MrEbrahim019
    @MrEbrahim019 4 년 전

    You can do this Chris!!! we believe in you!!!

  • @adrianncharles436
    @adrianncharles436 4 년 전

    Total chaos ⛽️💨keep on pushing forward 👊🏼

  • @ete203
    @ete203 4 년 전 +6

    NAPA Platinum oil filter. Made by Wix and it's a full synthetic media filter. $8 at any local store. Check BITOG for other recommendations.

    • @airtaiH2
      @airtaiH2 4 년 전

      NAPA platinum oil filter is the ones you want. Believe it is part number 47060 that will work. Hi oil pressure flow with microfiber filtration

  • @CamaroRick
    @CamaroRick 4 년 전 +49

    I would say the timing and fueling are so far off that they are causing the headers to glow. Brace the turbos and let her eat on the dyno

  • @sergl.9733
    @sergl.9733 4 년 전

    Bro I wish u all the luck u need to get into sema. I have faith in u guys! U guys are killing it!

  • @rafaelcbm
    @rafaelcbm 4 년 전

    i don't think any project like this would not have the same kind of problems you are having right now. keep going!

  • @mikaelkarlsson2352
    @mikaelkarlsson2352 4 년 전 +7

    Ahh I just planed to go to sleep when I see this been posted.

  • @B58_TAYF
    @B58_TAYF 4 년 전 +198

    TJ Hunt: Supra body kit
    Chris: Hold my TRULY

    • @killeguy
      @killeguy 4 년 전 +3

      More like hold my 8 cylinder

    • @waykool698
      @waykool698 4 년 전 +2

      But tj has a nice Ferrari widebody. Stop trying to be edgy, little soy boy

    • @killeguy
      @killeguy 4 년 전 +8

      @@waykool698 Ferrari is for children, real Turners build their own supercars

    • @waykool698
      @waykool698 4 년 전 +1

      omar Tillanen raza get back to Iran Omar.

    • @killeguy
      @killeguy 4 년 전 +3

      @@waykool698 harsh btw iam Swedish

  • @LRtwins2
    @LRtwins2 4 년 전 +2

    Go to a local shop with the manifolds, offer a shout out to their business for a close timeline. Local artisans do amazing work quickly. Good luck man

  • @VikingsFan-sy2vc
    @VikingsFan-sy2vc 4 년 전

    Good work. I love the education on the channel like always.

  • @evolutionofjoker7684
    @evolutionofjoker7684 4 년 전 +24

    The paul wallker scene 😍🤣

  • @TreyWitney
    @TreyWitney 4 년 전 +3

    That roll of electrical tape gave me anxiety the whole episode lol

  • @GalacticBlader
    @GalacticBlader 4 년 전

    Your videos are my morning coffee

  • @MaelNZ
    @MaelNZ 4 년 전

    Really keen on this project, keep going you can do it, congrats from France !

  • @cmzangetsu1993
    @cmzangetsu1993 4 년 전 +66

    oil filter reccomendations? Been using wix filters in everything I have without issue.

    • @yazmo109
      @yazmo109 4 년 전 +2

      wix were excellent in the test they did

    • @aletzr
      @aletzr 4 년 전 +6

      coffee filters are cheap :)

    • @freqvent
      @freqvent 4 년 전

      Said this on another comment, high quality filters. I wouldn’t skimp on it even during break in with the turbos, lines, and coolers you’d have to replace in the case of failure.

    • @seagullsays5831
      @seagullsays5831 4 년 전 +2

      Oil filter recommendations:
      LITERALLY ANYTHING OTHER THAN FRAM

    • @eddie_8317
      @eddie_8317 4 년 전 +1

      @@yazmo109 I just bought a wix for my Camaro yesterday. I heard they are really good so I figured I'd try them.

  • @francistheodorecatte
    @francistheodorecatte 4 년 전 +3

    WIX oil filters, or literally the NAPA Gold or Platinum series oil filters (since afaik they're made by Wix.)

    • @airtaiH2
      @airtaiH2 4 년 전

      NAPA platinum oil filter is the ones you want. Believe it is part number 47060 that will work. Hi oil pressure flow with microfiber filtration

  • @smsdragon24
    @smsdragon24 4 년 전

    Mobile one filter. Congrats on the engine start! Now crunch time!👍👍👍😍

  • @JR-.-.
    @JR-.-. 4 년 전 +2

    Good luck bro! Ty for being honest..

  • @pellouardkevin2284
    @pellouardkevin2284 4 년 전 +7

    Fuel pressure isn’t the issue?
    Engine shut down like it’s running lean

  • @bogbog
    @bogbog 4 년 전 +3

    Hey btw i know you might have answered his question at some point, and I've been wanting to ask for the last two or three episodes, but aren't the exhaust pipe misaligned a tad?

  • @safeer_saf
    @safeer_saf 4 년 전

    The excitement is still on🔥🔥🔥 you’ll make it on time bro...We believe in you❤️

  • @Crown_West
    @Crown_West 4 년 전

    You are an inspiration to all of us. Find out whats on the other side of that hill! This has been an amazing build!