@@junglejim2931 : It’s not the complete quote. The full quote goes like this: "The sculpture is already complete within the marble block before I start my work. It is already there, I just have to chisel away the superfluous material." -Michelangelo
One pf the best videos of modern technology ive ever seen. It doesnt appear complicated and its only a relatively small peace of machinery but its so clean and precise. Resembles something of what humans thought the future was gonna be like in the 90s.
@@Sharpless2 To be fair it is essentially a tool riding left and right along a screw with a motor strapped to it to cut a chunk of metal strapped to another motor turning the part into the tool. With a basic understanding of simple machines and a 30 second video of operation most mechanically minded people can get 80% of what is happening. The other 20% is software and electronics.
@@bosskeystore8694 Its the 20% that is so complicated. What if i asked you to put together the hardware and quickly whip up some software to control a 3 or 5 axis cnc with no prior knowledge on programming. Its never as simple as it looks.
Become a CNC Machinist. To start, I went to NTMA in Costa Mesa, CA some years back. Study up on your Boolean Algebra, Sines, Cosines, and Tangents, then have at it. By the way, the U.S. Marine Corps made sure mine was paid for by the VA. Semper Fi.
@@griffindragon3562You know Only around 2% humans are responding for humanity's achievements? Rest just had muscles. Brain consume a lot of power. In evolution, it was beneficial in a human tribe to have people who had better nutrition and nurtured well to have bigger brains and rest had muscles and were designed to follow others and these few intelltual people. Follow "Popular" stuff. So when he mention humans, he isn't talking about himself, but brilliant minds
@@Dr.Kay_R Are you a scientist? I have a doubt.According to Charles Darwin, the survival of the fittest or natural selection of nature caused the evolution of diverse organisms on earth. So, because of the structure and conditions on earth, life form is generated this way. Now, if on some other planet in a different solar system had a different atmosphere on it's surface, it might lead to the generation of different sentient beings. And if we don't know their physical shape or behavioral pattern of those sentient beings, we can't know they exist, for example, the beings can be made up of metals, and they might have different modes of communication,etc. In essence, they have a system of their own in the same way as we does. Is it a possible scenario?
A wealthy gentleman in front of the line at the pharmacy was bitching about his cost of insulin needles, forty cents apiece. I said to the ingrate that he nor I could not make one for less than four thousand dollars. He thought about it, then agreed.
Most amazing part to me is a mechanical engineer designed and built the machine that does this from the box that contains the process to every gear and head stock.
You know they don’t just press a button? it requires hours of setting up a 3-D model on a program like solid works. And a program that you either have to type or generate through a CAD program. These software‘s are also thousands of dollars. Just like the machine. I forgot to add the machine doesn’t know anything you have to tell it where everything is every single time you use it. All it knows is numbers.
@@user-wk3qr3ei7hв переплавку и снова в дело, чотакова? 🤷♂️ я сам, будучи учеником токаря, себе комплект шахмат выточил. Спалившему меня директору сказал, что набиваю руку для фигурных работ, наказан не был
@clesiorobertodesouzalopes8977 you say that as if that bar of steel didn't cost like 30 bucks lmfao. Waste of resources my ass, tell me you've never worked in the metal working industry lmao
@@clesiorobertodesouzalopes8977the scraps of metal ARE recycled by melting them into another bar. So the only part that's "wasted" is the scraps of the last bar you have used, and that is until you use another. Plus, like the commenter above me said, the bars themselves are relatively cheap unless you use some fancy alloy that costs a shit ton of money
Very nice 👌 you have a specific place and precision toolset to deal with and I guess it’s the game of patience . I was industrial electrician used to watch when ever I happened to be in shop floor . Mostly our work troubleshooting of cement machineries nobody even bothers what we do they wanted everything running 😢.
If it’s being controlled by a computer then it’s cnc, computer numerical control, tool heads tend to be carbide, especially when machining steel, it needs to be a material with a higher hardness index than the material it is cutting
Ah no meu tempo de estudante de tornearia mecânica do Senai, não existia esse luxo automatizado, com ferramentas de corte desta qualidade.... os bits que se afiava era uma tristeza..... mas era divertido.... lá se vão uns 45 anos!
It's fun to watch at this speed. I'm not impressed though as kids were making things like this this in my high school machine shop , on basic lathes, in the late 80s, albeit not as quick as shown here.
In all the videos I watch of maching metal or wood, they put a 6" piece of stock to turn a chess piece. I worked in a fab shop for years. I was taught to save every piece I could because it could be used on a potential job. The only scrap we had, nothing else could be gotten out of it.
Профессионал чего, когда станок делает сам, с ЧПУ управлением. Вот если бы он в ручную это сделал, хотя это самая простая работа на токарном станке. Фигуру просят выточить на практике у учеников.
Nice. CNC programming you let the software generate the tool path, all the programmer does is identify the surface to be machined and pick the tooling to be used.
![브롤 토크: 브롤러 돌연변이가 등장합니다! 🧪 [브롤스타즈]](http://i.ytimg.com/vi/BBCT43nH6_Q/mqdefault.jpg)
Nice, impressive. Let’s see the knight piece now
Lol impossible
No seáis pendejo
@@psych0cqt194 It's possible, but you'd probably need a 6 axis milling head on the lathe, this one looks to be a more basic model.
😂😂😂
What about the chessboard 😊
Foreskin remover 4000
Not big enough!
Americans would love this
😁
😭
@@Rich-fr2yv_🔪🩸👹_ You're *next*
Nice! Sat here the whole time thinking I was watching a trailer hitch being made.
Same!
Same lol
Same!
Miniature trailer hitch
I thought it a container holder from code 14😊
Вот это красота 👋
Why did my brain go: “I hope this doesn’t turn into a butt plug.”
나랑 같은 생각을 하는 사람이 있구나
I was thinking chess piece then I said wait ✋️ probably a customized butt plug for someone rich.
똥꼬 날카로워서 아플 듯
Same lmao
Thought of that too😂
I need a full chess set like this
It will only take 7 years and 3million dollars to make like this
I need a same chess ??? But I what to do getting chess
I have full set made of solid horn, let me know if you need
With the horse piece.
That'll be 350 dollars dir
Можно смотреть бесконечно ,как работает токарный станок .
Es ist total beeindruckend, was CNC-Maschinen und ihre Programmierer zu fertigen imstande sind!
Echt tolles Video! Bitte mehr davon!
👍😎🇦🇹
Yes sir pro Nanda
At first I thought it was a bullet 🤣🤣
I thought it was a doorknob at first 😂
Convinced it was a screwdriver 😂
It's a buttplug
An or A
I thought a earphone jack 😂
This makes me think of Michelangelo’s quote: "The sculpture is already complete…I just have to chisel away the superfluous material."
Q
Pretty dope quote, if true
@@junglejim2931 : It’s not the complete quote. The full quote goes like this: "The sculpture is already complete within the marble block before I start my work. It is already there, I just have to chisel away the superfluous material." -Michelangelo
...я беру и отсекаю всё лишнее!...
@@______IVbro chiseled away the quote
One pf the best videos of modern technology ive ever seen. It doesnt appear complicated and its only a relatively small peace of machinery but its so clean and precise. Resembles something of what humans thought the future was gonna be like in the 90s.
We have had these since about 1960. Haven't changed much, just gotten faster. The software side has been the biggest change.
"doesnt appear complicated" yeah thats right, it doesnt *appear* to be so. It is.
@@Sharpless2 To be fair it is essentially a tool riding left and right along a screw with a motor strapped to it to cut a chunk of metal strapped to another motor turning the part into the tool. With a basic understanding of simple machines and a 30 second video of operation most mechanically minded people can get 80% of what is happening. The other 20% is software and electronics.
@@bosskeystore8694 Its the 20% that is so complicated. What if i asked you to put together the hardware and quickly whip up some software to control a 3 or 5 axis cnc with no prior knowledge on programming.
Its never as simple as it looks.
The only lathe I know how to use is manual so making something like this is impressive
Красиво! Люблю работу с металлом. Пусть даже в ручную
Can actually watch this all day
Иди работай на чпу станок, будешьткаждый день смотреть.
J'aimerais bien voir la réalisation des autres pièces.🤔🤔🤔😉😂😂
Become a CNC Machinist. To start, I went to NTMA in Costa Mesa, CA some years back. Study up on your Boolean Algebra, Sines, Cosines, and Tangents, then have at it. By the way, the U.S. Marine Corps made sure mine was paid for by the VA. Semper Fi.
Boring dude or dudette
Like 9x already
Incredible precision of CNC power and capabilities.
Now try the knight 😂 👎
저정도는 선반으로.. ㅋㅋ
ПРИВЕТ! ВЫ ИЗ КАКОЙ СТРАНЫ? Я ИЗ БУРЯТИИ
Butt plug real
Excelente Trabajo en el Torno, Saludos desde México 🇲🇽👍
"이제 너는 왕과 왕비를 수호하는 임무를 맡게 될거란다"
아 체스ㅡㅋㅋㅋㅋㅋㅋ
I want to see the whole set 😊😊
of buttplugs?
Me too :D
no
especially the Horse!
@@valeriyk9615 hahah that would be interesting!
Damn, humans are impressive beings honestly to create such a device
As if you are not a human.
@@griffindragon3562why are you assuming, "griffindragon"?
@@griffindragon3562You know Only around 2% humans are responding for humanity's achievements? Rest just had muscles. Brain consume a lot of power. In evolution, it was beneficial in a human tribe to have people who had better nutrition and nurtured well to have bigger brains and rest had muscles and were designed to follow others and these few intelltual people. Follow "Popular" stuff.
So when he mention humans, he isn't talking about himself, but brilliant minds
im dragon
@@Dr.Kay_R Are you a scientist? I have a doubt.According to Charles Darwin, the survival of the fittest or natural selection of nature caused the evolution of diverse organisms on earth. So, because of the structure and conditions on earth, life form is generated this way.
Now, if on some other planet in a different solar system had a different atmosphere on it's surface, it might lead to the generation of different sentient beings.
And if we don't know their physical shape or behavioral pattern of those sentient beings, we can't know they exist, for example, the beings can be made up of metals, and they might have different modes of communication,etc.
In essence, they have a system of their own in the same way as we does.
Is it a possible scenario?
Я такого ферзя. На уроке труда делал ,на деревообрабатывающем станке .в СССР нас учили любить труд. Очень жаль, что больше нет СССР.
Он есть.
@@sergfamily202 Только ОН нафиг не нужен!
The finish on that turned surface is pretty amazing. I've seen a lot of lathe work, but seldom that smooth.
Nothing beats machining process when it comes to manufacturing process. Unbelievable precision and surface finishing.
Unless it has not radial simmetry 😂
And don't forget the huge waste!!!!!
@SpaceOneKRplus that's what multi-axis CNC is for.
@dennisbundy9954 what waste? Most shops save their shavings and turn them in.
A wealthy gentleman in front of the line at the pharmacy was bitching about his cost of insulin needles, forty cents apiece. I said to the ingrate that he nor I could not make one for less than four thousand dollars. He thought about it, then agreed.
watching it go from jagged to round in one pass is a reminder of how insane our tech actually is. brilliant minds had to create that
****When was a lathe invented....I have one from ww2
Ты эту ВАШУ технологию первый раз вмдишь?😂😂😂😂
Зачем 😂😂😂
@@user-USSR999ну даже и такую технологию, мы не производим в нашей стране
@@TexasBigdon’t think their lathes were as good as this one
Now that is perfection 💯💯
Чистота обработки супер!
“How’d you cut your thumb?”
“Chess”
Beautiful to watch. 😇
Yapmasıda gğzel
The lathe work is always fun to watch!!
A field I know nothing about but always blows my mind seeing these.
Most amazing part to me is a mechanical engineer designed and built the machine that does this from the box that contains the process to every gear and head stock.
You know they don’t just press a button? it requires hours of setting up a 3-D model on a program like solid works. And a program that you either have to type or generate through a CAD program. These software‘s are also thousands of dollars. Just like the machine. I forgot to add the machine doesn’t know anything you have to tell it where everything is every single time you use it. All it knows is numbers.
The art of mechanical engineers ❤
Abi production engineers?
Engineers made not any art. Never😅
Tornería eso es moldear piezas. Los mecánicos arman no suelen dedicarse al torneado.
The artist wrote the program
The art of a CNC programmer and set up machinist DAMNIT ! Haha okay some mechanical engineers might program it but they usually don’t make it
One of the coolest things on youtube
I love how you can write up a program for a cnc machine and create a pawn! Cool!😊
До чего же техника может всё 😮так идеально ровно и красиво, просто завораживает 😮
Точно!,... и вкусно!
ЧПУ программа.
Аха...и стружки в металлолом сколько ушло. Баловство это...ЧПУ,оно и в Африке ЧПУ..🤗🤗🤗
@@user-wk3qr3ei7hв переплавку и снова в дело, чотакова? 🤷♂️ я сам, будучи учеником токаря, себе комплект шахмат выточил. Спалившему меня директору сказал, что набиваю руку для фигурных работ, наказан не был
@@Aurum534 ну тоже норм🤗🤗🤗руку набил? Тогда работать надо,а не заготовки переводить..Без обид,шутка!!!🤗
Завораживает!!! 👍
Да
Удовлетворяет
Да не ужели русс...
@@iBloherв каком смысле..? О.о
So pleasing. Wish I had learned some of this when I was younger.
That final touch was mesmerizing.
Insuperable!!! Una obra de Arte!!! Precisión al más alto nivel!!!
I call this waste of resources.
@clesiorobertodesouzalopes8977 you say that as if that bar of steel didn't cost like 30 bucks lmfao. Waste of resources my ass, tell me you've never worked in the metal working industry lmao
😅😅@@slayer2132
@@clesiorobertodesouzalopes8977the scraps of metal ARE recycled by melting them into another bar. So the only part that's "wasted" is the scraps of the last bar you have used, and that is until you use another. Plus, like the commenter above me said, the bars themselves are relatively cheap unless you use some fancy alloy that costs a shit ton of money
@@hiimgood you’re right, only energy to melting will be used again. Waste only if were wood.
I was a machinist for 45+ years. Retired a couple of years ago. I really do miss it.
Very nice 👌 you have a specific place and precision toolset to deal with and I guess it’s the game of patience .
I was industrial electrician used to watch when ever I happened to be in shop floor . Mostly our work troubleshooting of cement machineries nobody even bothers what we do they wanted everything running 😢.
Much respect to you sir, for your work 🫡 takes serious patience to get into such a craft
I don't know very much about it. Is this technically a cnc machine? What is that tool head made of is it diamond tipped etc?
If it’s being controlled by a computer then it’s cnc, computer numerical control, tool heads tend to be carbide, especially when machining steel, it needs to be a material with a higher hardness index than the material it is cutting
Why did you retire? Why not at least do some work part time, make a few bucks and do what you love?
I remember having to do this by coordinates and writing out the code myself. Then they introduced us to solid works and master cam.
Honestly, CNC machines are so much valued invention. You can land serious money having knowledge about these beasts.
Ох уж эта техническая магия, обожаю такие вкусности.
旋盤の使い方が上手ですね。切削面にムラがなくて綺麗で、感動しました
It's a CNC machine,he's not doing this manually lol
E' un controllo numerico!!
Ah no meu tempo de estudante de tornearia mecânica do Senai, não existia esse luxo automatizado, com ferramentas de corte desta qualidade.... os bits que se afiava era uma tristeza..... mas era divertido.... lá se vão uns 45 anos!
Soon as I realized it was a chess piece, was so stoked. Beautiful 🙏
I remember making this in my Mechanical Engineering Project...
Yeah same here
@@Drag21000 now what are you doing
It's fun to watch at this speed. I'm not impressed though as kids were making things like this this in my high school machine shop , on basic lathes, in the late 80s, albeit not as quick as shown here.
Смотреть на это можно вечно,класс!!!😮
So mesmerizing and relaxing to watch. ..
That pawn costs $248.75 US after parts/labor and printed certificate of authenticity.
dude this would make a great chess peice, make a chess set with this and ill buy it immediately! (i subed to get updates on chess set)
I don’t think the common person can appreciate how much carbide inserts have transformed the whole metalworking industry..
Turns metal into butter
What's a carbide insert?
@@zerubbabelsbridgeThe brown exchangeable tip of this tool.
I used to sharpen and create bits from stock for different cutting angles and applications. those replaceable bits replaced me.
Half of the skill is to use good quality steel stock, not any old Re-Bar.
In all the videos I watch of maching metal or wood, they put a 6" piece of stock to turn a chess piece. I worked in a fab shop for years. I was taught to save every piece I could because it could be used on a potential job. The only scrap we had, nothing else could be gotten out of it.
That was my job 30 and by pure hand I did those work, 🙌
チェスの駒だった😊正に芸術✨
Чистая работа професионал
Профессионал чего, когда станок делает сам, с ЧПУ управлением. Вот если бы он в ручную это сделал, хотя это самая простая работа на токарном станке. Фигуру просят выточить на практике у учеников.
@@user-gd2nc7gf8zда он и про станок говорит, успокойся
Станки очень дорогие, любой дурак сможет если есть деньги на станок
Ты сможешь написать программу ,что бы это выточить и не вьебать станок не имея практики на ЧПУ до этого ?
@@Vin-Drosselу дураков денег нет, и к тому же я посмотрел бы на тебя около этого станка😂 смотрел бы ты как б4р4н на новые ворота
Creating beauty with the touch of keyboard.
متابع قناتك من مكة المكرمة
بلد الإسلام و المسلمين
رضيت أنا بالله ربا و بالإسلام دينا و بمحمد نبيا ❤
А фигуру коня можно ?
Да хоть всю доску 😂
🦄🦓🐴
Какого? 🤔 🤔 🤔
ПОЦЕЛУЙ от Маши 😘 😍 🥰
🤣🤣🤣орнул просто, ска какой ценизм
Верхнюю часть отлить, нижнюю так же ,и сварить 😅
cnc milling
The photography is fantastic, the mill programming is beautiful, I love the final profiling pass it looks so perfect
Esse peão vale mais que a rainha e o rei juntos.
There were at least 5 points where it was a finished piece, but nope it just kept going 😂
Cool to watch
Nah screw woodpeckers we got metalpeckers 💀
いや、すんげー技術だな
CNC旋盤の凄みが出てるなぁ。
The smoothest thing i had seen in my entire life...🤩
A complete chess set like that would be incredible, my neighbor was a machinist, he would be impressed, good job.
Our forefathers would be so proud of how far we have come
That is one fancy b utt plug 😂
Absolutely beautiful work
Beautiful,just beautiful.
Bu aksesuarları bronz veya pirinçten yapmak çok muhteşem olur ✨
that last sound sounded like a confident checkmate
Une belle pièce d'échec !! 👍👍👍
Simplemente impresionante
So impressive and satisfying tech job 🥸👍
Amazing, just can't do perfection like machines.
I'd bet there are a few of the ol' machinists that can duplicate that exactly and with a 50 year old machine.
Amazing machine❤❤❤
สวยงาม
The CNC programming for the knights would be a nightmare.
Amazing to watch and I would love the full set
This is so much satisfying
Как же мне все это нравится...
I want to see the whole chess set❤
Que maravilla de máquina de torno....
Watching this machine Finish the Work is my favorite
back in 1990, I ran a non-CNC lathe. That would have taken me a half of a day
Bellísimo trabajo
За процессом можно вечно смотреть..
Станок видимо с программным управлением
Very nice Really. ❤
어제 회사에서 짜증나는 일이 있어서 오늘 ㅅㅂㅅㅂ하면서 출근했는데 이영상을 보고 마음에 안정을 찾았습니다
왜?
O que aconteceu no seu trabalho ?
Где вы. Работаете
I love an insert that can make lots of popcorn chips.. 😉👍
Очень чисто на быстрой подаче, обороты около космические?)
So satisfying ❤
Очень хорошо... Мне это понравилось🙂
Would love to see how it produces the rest of the pieces. 👍🏽
Just beautiful
I can't believe this its so amazeful😮
One of the best job in the world... Absolute professional...
عقل الانسان معجزة من معجزات رب العالمين
يفضل العرب الصلاة خمس مرات في اليوم. بالنسبة للعرب، التعلم عن ظهر قلب يعني العلم.
I see it as a wonder of evolution.
Nah it's just evolution
Nice.
CNC programming
you let the software generate the tool path,
all the programmer does is identify the surface to be machined and pick the tooling to be used.
It would be incredible if you make a full set of chess now❤
Why do so many parents try to encourage their children to train as doctors and lawyers when the world really needs more skills like this?
Because of money... money 😂😂
Токарь 🔥💪👍
Excelente 👏👏
Not many people give birth to Robots
Bro are you saying doctors are not needed? Are you missing a few chromosomes?