소스 코드
- 게시일 2019. 07. 02.
- Brake pad replacement? Ever wonder how to make brake pads? Usually I show you a DIY like how to replace brake pads, but in this video I show you how brake pads are made!
Brake pads from this factory: www.NRSbrakes.com/nrs-chrisfix/
To make brake pads, we start out with raw pickled and oiled steel. The steel gets stamped into a brake pad backing plate which gets analyzed to make sure it meets OEM specifications. Next the brake pad backing plate goes to the NRS press to get a mechanical attachment. Then the backing plates get galvanized and finally brake pad friction material is added. The manufacturer can add and friction material they want such as semi-metallic, organic, or ceramic friction material. Lastly the shim is made and installed on the brake pad and they can be sent to testing! When it is all said and done, I took the brake pads we made and installed them on my truck with new brake rotors!
The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: www.NRSbrakes.com/nrs-chrisfix/
How to replace your own brake pads and rotors: • How to Replace Brake P...
How to Replace Drum Brakes: • The ULTIMATE Guide on ...
Drum to Disc Conversion: Still working on this video
→ Become a ChrisFix Subscriber: krplus.net/usubscription_c...
→ Instagram: / chrisfixit
→ Facebook: / chrisfix8
→ Website: www.ChrisFixed.com
→ My Channel Home Page: / chrisfix
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of ChrisFix, I cannot guarantee against improper use or unauthorized modifications of this information. ChrisFix assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. ChrisFix recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of ChrisFix, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not ChrisFix. - 자동차
![나 이대 나온 남자야 [이화여자대학교 도자예술전공] | 전과자 ep.51 [EN]](http://i.ytimg.com/vi/KYNKemqi1X4/mqdefault.jpg)
![[Jeans' ZINE] 제2회 엉망잔칭 토론회 EP.1 데자부🤦♀️ | NewJeans](http://i.ytimg.com/vi/FN_KHxXZC0k/mqdefault.jpg)
The company that let me film in their factory is giving all of my fans 20% off their brakes using the code "20off" at checkout. I do not make any money from this! They are doing this to get you guys to try out their new technology brake pads and I will always share a discount to help my subscribers. Here is the link: www.carid.com/nrs-brakes/
This video was one of my most favorite that I have ever made! It took about a months worth of work and I hope you enjoy! It took a lot of time and work to make and NRS brakes literally closed down part of their manufacturing line so I could film this. It’s absolutely incredible how much help they were! I hope you guys like it and I hope other brands reach out so we can do more of these how-it’s-made episodes!
Also I will be in Ireland for a meet-up on Saturday July 13 so check out my Instagram or KRplus stories for more info if you are from Ireland!
Really good video. Nice transitions!
Strait up, the in depth version of “How it’s Made” and I literally got up the second this was uploaded (fell back asleep though x) to watch it lol.
ChrisFix This is indeed one of your very interesting videos. I love your channel and follow every video you air.
Hey
Really cool video Chris! Would love to see more like it
Quality content means that i can watch 21 minutes without getting bored. BIG LIKE!
That is the goal! A TON of work goes into each video so your life is never wasted and you can learn and enjoy the videos from start to finish!
@@chrisfix hell yea
@@chrisfix youtubers like you are extremely rare, incredible job chris
Wait ?! That was 21 minutes ?
Omg i didn't saw :3 (looking at it at work)
I was dreading 21 minutes but it went by so fast I forgot to change the channel LoL
Chris went from showing us how to fix cars to showing us how to make cars.
Hahaha, this made my day, its true.
@Kevin Prima I love love to see how spark plugs are made too.
He's then going to show us how to BE cars.
ChrisMakes
@@MemevilleSpeedway "CHRIS FIX HERE! TODAY WE GO TO A TOILET RECYCLING CENTER WHERE WE ARE GOING TO SEE SPARK PLUGS CREATED!"
Hey guys Chris fix here, today we are going to swap this in-line 4 for a thermonuclear reactor!
I think an LS or something would be good enough lol
@@chrisfix thermonuclear power is where it’s at
ive seen this episode it was called Chernobyl i think.
@@chrisfix Hello, I'd like to order a race car. Oh, and it must have a TURBO JET ENGINE!
"Using basic hand tools"
I'm in mechanic school and just showed my teacher this video. He advised us to watch your videos if we ever got bored or was confused, because of how simple you make fixing a car looks.
It "looks" simple but in reality is it that simple?
**Waits for How a Cake is Made** Hi ChrisMix here and today we are going to make a delicious red velvet cake. We're using nothing but a set of these common hand tools to make our cake.
I mean he has gone to culinary school
And just torque this frosting to 800 foot pounds
@@legoivan44321 And good, don't forget the soap wooder
@@matthewjohnragland and now we are putting some thread lockers
don’t forget the engine oil
Everyone: "How It's Made is the best show ever!"
ChrisFix: "Hold my soapy wooder"
And this is why chrisfix is leagues above other car youtubers.
I agree, but tbrh I hate his hyper energetic voice ngl
@@tydshiin5783 I love it, I hate monotone
It's amazing that the factory gave you so much access with cameras. They really trusted you, and you've been faithful to it.
You've conveyed the information in a way that everybody can understand.
It's a win/win/win for you, the company & us.
“Welcome to the Chevy service department. How can I help you?”
“My brake pads are on fire.”
CSD- OH that is a common problem
Lol...love it.
And then their response will be "oh that's normal"
G J Chevy-that’s the least of our concerns, come back in about 1 week when your transmission goes out and about 2 weeks when your engine blows up
Me and my homie Racco, man. We were building brake pads man. -Who is Racco? -Racco mah man. Brake pads were liiiit! (Dubai was lit reference)
brakes on fire? no problem, use the built in navigation system to find your nearest food store. buy some hotdogs and marshmallows, heat them up with the brake fires and bring your vehicle into our service dept asap! I'm hungry and forgot my lunch today! I'll be waiting!
just imagine arriving at the factory for work and all off a sudden you hear a guy yelling " hey guys chrisfix here and today im going to show you...".
Say Pickled and Oiled Steel 3 times in a mirror and ChrisFix appears behind you to help with your projects.
Lol
I definitely think you should do a series on how all suspension components are made and also wheel bearings, exhausts and anything else you can think of. I and I'm betting a lot of other people would love to see that.
Watching this makes me feel proud of being a Nucap Industries employee. :)
Arjun George Cool!
Awesome !
Arjun George wish I was an employee there.
i'd really consider some of these but there aren't any for an fj cruiser yet
Thats some serious science going on in that factory...nice work !!
I love how he has 5.2 million subs but still enjoys his old mustang just as much as he used to before his subs even though he could easily buy a much nicer car. Keep up the work man
I appreciate it about him too although I think he just bought his dream car! Well deserved. I think it's some kind of truck--my guess would be a maxed out and loaded Ford Raptor
FACTS FACTSSSSS
I have a 6 door dually, it's a very heavy truck and I've been looking up which brakes would work the best for me and this vid just saved me time, Thank you chris For this video you have no idea how much this saved me
These would definitely work well for your truck! Thanks a lot!
Hi Chris. I was the Industrial chemist ( I am a Material Scientist by education) at a company in Sydney Australia, called Kirby Products in the mid 80s.We made OEM air filters, fuel pumps, and variable ratio rack and pinion steering. I tested materials to ASTM certification. So if you want ideas, well visit a gearbox maker, or engine builder, or car seat manufacturers. We love your videos. You are an amazing young man. THANK YOU.
I am astounded at how much I have learnt from you.
“We’re gonna make brake pads for our truck... Using common hand tools!”
Was really expecting to hear it.
😂😂😂😂😂😂😂😂 that'd be hilarious.
I was going to make a joke about that in the beginning haha
@@chrisfix hey
Timothy hahaha me too mate, though the same thing
Well some people have used oak planks as temp pads.
ChrisFix 2012: I will show you how to replace your brakes.
ChrisFix 2019: I will show you how your brakes are made.
ChrisFix 2026: I will show you how to make your own brakes.
Vicente Capito haha! “Use this simple trick to save you thousands of dollars” 😂
@@Poop_Scoop71 with common hand tools
@@derkritiker9042 tools that you can find in your garage hahahaha I laugh so hard on that
@@k4piii and he brings out. Millions of dollars worth of equipment 😂😂😂😂😂😂
ChrisFix 2038: I will show you how to brake without any brakes
Chris you are the best! Not only do you show us everything there is to car repair but now we can see how the parts are put together. Keep up your channel because I keep learning so much with every video!
This was really fun. I've always loved shows like How It's Made where you learn how the manufacturing process works, and this was just as entertaining and educational. I'll have to request fusion process breaks from now on.
4:01AM
*Sees new chrisfix video*
*Just one more before I go to sleep for real this time*
True lol
Timezones: *Exists*
Internet: Lol what is "Timezone"?
*"R/whoosh" me i dare ya, Reddit fags*
And i am watching this vedio in india
4:20am
Hats off to that company for letting you film everything you did. 👌👍
I'm studying as a automechanic, and this video really helped me pass test at the college. Thanks Chris, keep it up!
Being a professional auto mechanic, I like the personal behind the scenes view of manufacturing and testing. Tours are not generally available
Expanding to other parts is a great expansion, is a great idea.
Thanks
Dale
ASE Master Technician
You will never see a new video on chicken processing plants from the large corporate socialism corporate welfare company.
"But it don't make no sense!" Pa cried.
"Not till you see the fella that put out this here bill. You'll see him, or somebody
that's workin' for him. You'll be a-campin' by a ditch, you an' fifty other famblies. An'
he'll look in your tent an' see if you got anything lef' to eat. An' if you got nothin', he
says, 'Wanna job?' An' you'll say, 'I sure do, mister. I'll sure thank you for a chance to
do some work.' An' he'll say, 'I can use you.' An' you'll say, 'When do I start?' An' he'll
tell you where to go, an' what time, an' then he'll go on. Maybe he needs two hunderd
men, so he talks to five hunderd, an' they tell other folks, an' when you get to the place,
they's a thousan' men. This here fella says, 'I'm payin' twenty cents an hour.' An' maybe
half a the men walk off. But they's still five hunderd that's so goddamn hungry they'll
work for nothin' but biscuits. Well, this here fella's got a contract to pick them peaches
or-chop that cotton. You see now? The more fellas he can get, an' the hungrier, less
he's gonna pay. An' he'll get a fella with kids if he can, 'cause-hell, I says I wasn't
gonna fret ya." The circle of faces looked coldly at him. The eyes tested his words. The
ragged man grew self-conscious. "I says I wasn't gonna fret ya, an' here I'm a-doin' it.
You gonna go on. You ain't goin' back."
Me: "I'm going to bed early tonight"
Chris fix: "you wanna see how break pads are made?"
Me at 3am: hell yea!
Masculineish That’s literally the exact same boat I’m in.
Bro, I read your comment and looked at the clock and it's 3:01
3:58 now!
5:26 a.m little late but ok 👌
hahaha
Chrisfix: *posts brake pad video*
Dream car video: "am i a joke to you?"
Now whe can wait a month longer😂
considering ill probably never be able to afford to buy you, yeah, you are a joke to me!
oof
I think he’s getting low on ideas because of too much preventative maintenance on his cars and then not braking lol
My four year son would love to see more videos like this. He thinks you should do how brake rotors are made. Thank you for taking the time to make amazing videos. We love them!
@chrisfix you need to pin this bro
I'm a quality engineer with 20 years experience with drum brake manufacturing. I have nothing but compliments for Nucap -- looks like an absolutely first rate factory! Thanks to Chris for a good job telling the story.
Let Chris fix narrate how it’s made and make it only about cars
Plus, the factory reminds me of the Costco warehouse.
After this video, NRS Brake's stock price shot through the roof. ;D
Dude this "how is it made" idea is great keep it going
Thanks!
hats off to the company for letting you go to the factory see the production line, it really instills you you with confidence to seeing a quality product made.....
Extremely well done. Both you and the factory should be proud. Very informative and it's useful to know the "why" behind things so you can make better decisions when buying and when fixing.
You should be given a lifetime achievement award once you are like old and all done with making youtube videos! Kudos to you
2016: How to replace brake pads
2019: How to make a brake pads
2023: How to build a car from scratch
2026
How to make a car parts on a molecular level.
AND THATS A NIGHT A DAY DIFFERENT
2049: How to genetically modify steel
2060
How to fix nuclear engine of your space craft to visit your relevant in Mars
I love your videos. Although I never changed brake pads or brake rotors of my cars myself before (until now), I would try it next time! Showing us how brake pads are made in the factory in Toronto was so interesting!
Thanks a lot! I thought it was pretty interesting as well! And let me know how it goes!
YES, make more of these videos! IMHO, this was the best "how it's made" type video I've watched. Your video is organized, precise, clear, informative, hi-rez, and entertaining. I'm guessing that creating the video took a ton of effort, and I am probably not the only one that appreciates all your effort and creativity. Congrats on the first of what hope are more.
Very cool, love "how it's made" videos. Especially car parts, since I know jack about cars lol
Brakes on fire = One of your best vids yet.
I have been up since 3:30am watching videos on how to change out brake pads. I'm 65 now and so many changes on auto repair I wanted to see if it's something that I could still do. Watching several videos on what the best pads to buy for me Chris your video was the cause and deciding factor for me . My delima was OEM or after market and cheap vs expensive. Seeing the production video showed me that this company did not short cut any where. I'm going with these because even if I only keep the vehicle another year, I still will be operating it and safety is of utmost importance. Thanks for producing the video, and I going to be checking the closest video on changing brake pads for my 2018 Nissan Murano Platinum. Vance P 9/1/2021
man. back in the day, entire tv stations made programmes like this...nowadays, a lone youtuber does all that work. and that with equal, if not better quality. amazing.
How its Made: ChrisFix special edition lol
this has better quality short of a director and scripted narrator which Chris is doing in his own way. style is everything. I love this episode...I mean video.
What an awesome company letting you film there. I’ll have to see if I can buy their pads here in Australia. Thanks Chris & cheers from Stuart. 🇦🇺
dude the manufacturing of car parts is so fascinating and you did it such great justice. if anyone should be doing how-its-made videos about these things, it's you. you don't try to make things sound mind blowing, you let the process speak for itself. but you break it down to it's fundamentals and show every step so by the end, we know what's up. by the way, that galvanization process blew my mind I really love how you shot and showed that
Yes please more more feed us with information. Maybe clutchs, or drum brakes or bearings, how CALIPERS for brake pads are made.
- an absolutely normal day in the factory where everything is fine and absolutely nothing went wrong, no car problems and no maintenance needed, engine didnt blew up and everything resumes normally
ChrisFix: "HEY GUYS CHRISFIX HERE"
I know this is an old video but, great to see the energy and style of video hasn't changed.
Awesome opportunity you had to film this for us. Good to see this factory saw something of value in you and your channel.
This is by far one of the most insightful and educational videos related to motor vehicle parts. And it's a real nice factory. Looks clean, safe and professional.
He really stepped up with this video with the whole 3D demonstration and everything
Does ChrisFix know how to animate in 3d?
I was thinking the same thing, if he did by his self thats amazing but even if he paid someone it was an excellent idea
@@gjergjib.9896 dude, he probably just used NRS 3d animation that they already had.
This channel has helped me fix my marriage. You're doing the Lord's work Chris.
eurosonly but have you been able to fix your car?
Did you add medium strength thread locker to your marriage?
moXon460 this made me crack a laugh 😂
Did you actually jave a miscarriage? Sorry to hear if actually happened.
I love this channel. It teaches you actual things that you didn’t know of without wasting half an hour of your life. I don’t regret subscribing.
You may like what I have to offer on my channel as well then. If you like right to the point mechanic stuff check it out and let me know.
Thank you
This is an amazing video. What a great experience you shared with us, your viewers. Thank you! I like to know the manufacturing process of items! Keep them coming! Nice job Chris!
Chris is literally going through great lengths to bring us good videos.
Chris favorite word: snug
Chris favorite phrase: out with the old and in with the new
And a little bit of medium strength thread locker 😉
@@magreger Torqued to Spec
Chris favorite item: Soapy Wooder
Eli Taylor & “good”
and "Perfect!"
Awesome video Chris. You were such a lucky boy❗ Access like that into any manufacturing facility is extremely rare. Videos like this appeal to my Engineering side and this one especially, since I've been a Professional Automotive Engineer for 40 years (but 'retired' this year, 2020, thanks to covid). It reminded me so much of some of the places I've been and products I've been involved with.
Keep up the great work. I, for one, would love to see more of this kind of video.
Thanks a lot! Once this whole covid thing is over (hopefully soon!) I'm planning on working with more companies to make videos like this!
I've always been a big fan of "how It's made" Tv show, but you definitely killed it! You went into so much detail step by step that It was very entertaining. Like always, great video Chris!👍👍
Chris: Im Gonna Show You Guys My Dream Car in the Next Video!
Brake pads and Water pump: hold our beer
Edit: Chris, Jesus Christ. It's been a month. Where's the dream car video?
Id rather say: hold my fluids but doesnt our cars run on beer also :D
Awesome video Chris.. do more of this... Tyres, engine blocks, turbos, superchargers would be nice to watch
Roshi_Isac EVERY VIDEO HE MAKES WOULD BE NICE TO WATCH WHAT DO U MEAN MATE?
@@soldr3427 did you even watched the video? because if you did you would understand my comment
No I didn’t watch it at all lol
I just clicks vids and comment on random comments for no reason
I figured.. have a good day .I.
Wow. That was one of the best "how its made " segs. I've ever seen!
Awesome!
This was so well done. You've come a long way. Been watching for years. Your editing and presentation is spot on. Missed Jakub and Yuri in this one!!
Chris when he gets new girlfriends:
Out with the old and in with the new
probably more like "out of the old and in in the new" lol
"And before i go in i like to put some blue thread locker"
Mercer Frey 😂
"And now i show u the before and after" ^^
Forgot to torque it down!!!!
I always thought he did voice overs after lol but you can hear the echo at the factory 😂
Sometimes he does sometimes not.
I work for a company in Tennessee making brake pads. I'm a press operator there and we have a totally different system than that one shown. Fascinating how different our processes are. We make parts for Ford, GM, and Tesla mostly.
This is pretty cool! You made it very easy to understand and interesting to watch. I'm not a very techy person but still enjoyed the video. Thank you Chris and NRS for making this happen!
One of the most informative videos I've ever watched. I love manufacturing processes
Awesome! It's so cool to see what goes on behind the scenes!
@@chrisfix it's very interesting
I lofe refigeraturs
I like trains
@@valles6903 I like turtles. hahaha
Chris fix: hey guys today I'm going to show you how brake pads are made
Dream car video: am I a joke to you???
A really fantastic attempt to give a glimpse of the whole process.
Awaiting for more such technical manufacturing industrial videos .
Well done Chrisfix...keep going.
yea i got triggered xD
The dream car was a joke it was a rental to make us hyped
U guys obviously dont follow him of Instagram
Great video Chris! Loved it! Maybe how a radiator is made would be an interesting video?
I'm and engineer that spent half of my working life in Toronto (Late 19's to late 1990s) making brake components. This is very simplified showing of the process, there are at least 2 dozen more steps not including making of friction material.
What an excellent documentary, equal, if not better than many large corporations. This film fully engaged me from start to finish in a way many other major documentaries just couldn’t and had me wanting for more. Well done indeed.
Aye, I see that engine hoist behind the truck for the Del Sol 👀😆
;)
Good eye! B16 swap?
@@jilianlestercruz6310 i have a big feeling hes gonna boost a b series!!!
Lian Cruz it’s for the eBay turbo kit. Don’t mean that as a diss, he legit bought an eBay turbo kit 😂😂
Chris: “I WILL UNVEIL MY DREAM CAR IN MY NEXT VIDEO”
Viewers: “At least I know about water pumps and brake pads I guess.”
Dalton Robertson Maybe his dream car is EngineeringExplained’s S2000 on auction, he showed the car in his instagram
Yizhou Zhang false
@@yzhang8629 its a hummer h1
Very nice of them to let us in their factory and show their engineering process! Thanks!
You have now become the Mr. Rogers for adults.😁 Watching your videos has empowered me to tackle these projects again. It also brings me back to my childhood, working on cars with my dad, who has since passed away. So glad I subscribed to your channel years ago & might I say, one of the only. I absolutely loved the video. Thank you!!!!
2016: How to Change Brake Pads
2019: How to Make Brake Pads
2023: How to BE a Brake Pad
I'm listening ...
2027: How to Install Brake Pads in Your Feet
lol
2100: How to make your body a brake pad
Lol
Next time on Chris Fix, How Turbos are made....
That would be so awesome
Lol confirmed
@@BillAnt siraulo ka gago
Justin Redman I would love to see this. 😬😊
I only have like... 0.092% of a chance of making this even close to being a thing, but I know someone that works in the engineering department of a well respected turbo company. Chris- any interest? If so, I can do my very best to get you in touch. But it's really a shot in the dark.
I love those animations! I’d like so see some more of these animations to explain these kind of things.
that was amazing. thank you for making that video. my appreciation to you and everyone who participated in making that video. esp the commute. thank you Chris.
That was awesome! I'd be verry happy if you would make videos like that, I love "How it's made?" style videos.
I stayed up all night just to watch your video and my dad just walks in my room and he’s like why are you up at 4am and I said waiting on the chrisfix upload and he was just like ahhhh
That’s awesome! Thanks for the support!
Hell yea bro!
ChrisFix chris hi
Doing the same thing
Um it's half past one pm, isn't it?
Thanks Chris. You are true automobile genius as you spent time to uncover how parts worked and made.
Yes Chris I love seeing how things are made. Thanks for sharing with us.
Another level video Chris!! Fantastically produced and very informative.
Please don't shy away from the repair videos though ; )
If you’ve driven several vehicles, you’ve probably noticed that some vehicle windshields are equipped with a tinted strip on the windshield. The strip can either be blue that fades out as it gets lower, or it may be a pixelated strip that fades the lower it goes. These tint strips are usually around four to six inches in height and stretch the whole length of the windshield. The purpose of tint strips The tint strip on the windshield is actually known as a shade band. Its purpose is simple: to provide protection from the sun’s glare in that pesky spot just below your roof line and just above the visor. That spot is notorious for being difficult to block when you are driving into the sun shortly before sundown. The reason the shade band is only four to six inches in height is so it doesn’t obstruct or obscure your vision when you are driving in normal traffic. If the shade band stretched any further down, it could cause a distraction to some drivers or make it hard to see traffic lights at an upward angle. If your windshield doesn't have a shade band, it's important to get one. It's not mandatory on all vehicles nor is it required if your windshield was originally equipped with one, but it can prevent annoying glare from hard to block spots.
@@stevethea5250 nice but strange place to post this.
@@ReyaadGafur
What is the 50Mbps Satisfaction Guarantee?
If, at any time, you’re not satisfied you’re getting download speeds of at least 50Mbps, or you can’t receive a 5G signal, let us know and we’ll investigate. Under the terms of the 50Mbps Satisfaction, we guarantee you can return your 5G modem and cancel your contract without cancellation fees if this is the case. Refer to our terms and conditions for all the details.
@@stevethea5250 my dude i broke my sim i dont even have 2G forget 5G. I need a new number.
this was a cool video and i would love to see more. i actually loved watching the show How its Made and this made me feel like i was a kid glued to the TV again lol this.
Same here
The quality of video and dialogue is amazing. This rivals "anything" discovery puts out.
Very Good Chris, Most people have no idea why you buy Good Quality pads over cheap crap based strictly on price. I would like to see a video on different brake pad material selections including hard, soft and metal impregnated etc. Education is key to stopping idiocracy and death by price! I am a tight wad but I like to chase price AFTER choosing what quality level I want. You're helping people do just that
He has a degree in marine biology and went to culinary school and still chooses to get dirty and show us how to maintain and fix our cars . What a freaking legend.
Jharad C’mon ChrisMix Video!
Hi ChrisMix here and today for 4th of July I’m gonna show you how to make these delicious rack of ribs from your home kitchen with standard household appliances and of course my awesome BBQ grill.
**Dream car in background**
@bob barker trust me, this is bigger and better things than the restaurant business.
Stephen Oakley I can tell by his response to your comment that he’s not actually reading the comments
@68Camaro RS/SS You should stop trolling dude. Anger management. He's pointing out ChrisFix can do anything, but has a passion for cars and helping the average person, being the great person he is. It's not about you, what you own. Stop browbeating and being a monster.
So what. You have no right to rubbish anyone. He's helping other's, including younger people who might take up the trade. You're selling yourself, no value added, just a critic. World revolves around more than you. No one cares. That's why ChrisFix has millions of followers. Maybe you could inspire others....???
Hey ChrisFix you should do a video on how to rebuilt a engine bay, how to rebuild a rear suspension, and how to replace a gas tank
Also dent repair methods.
@The Grimeeaper He has a video on that, I’m quite certain. Just search his channel.
@@click9914 He has one on the gas tank. Check the sugar video, and also the $500 vehicle video. Both have gas tank removal, $500 one has gas tank replacement, sugar vid has cleanout.
And how to replace an entire car.
Verytryn how to fix Anti-Aircraft Artillery damage
Even the BBC wouldn't be able to make a video like Chris's this video. Thank you Chris it was mesmerizing watching it! A lot to learn!
Hi Chris I want to recommend you that you may show us how all car parts are made, in different videos. Appreciate this video of how brake pads are made
Thanks for the idea!
Chrisfix is a type of youtubers who really care about his subscribers and viewers. Thanks Christopher for the great job you do.
You know it! I try my best to put the best content out there for you guys!
ChrisFix: Next video's gonna be the reveal of my dream car
Jaguar: Hold my coolant
Pickup: Hold my crappy brake pads
VDel That’s true. I remember hearing that teaser as well. Hopefully the next one.
2:18 if you pause it you can just barely make out his dream car
it's way in the back - TUG's new electric plane pusher! it may not have much top speed but MAN that TORQUE!
A couple of years late. I just found this video. Awesome. Thanks, Sir Chris.
This was informative AND entertaining. Please do more of these, Chris.
Huge shout-out to NRS Brakes!
Thanks for letting Mr. Fix have a good tour.
Bro thats a great idea for a series. You're going to make the Discovery Channel jealous and they're going to make video about how u make ur videos lmao. I need new brake pads as well perfect timing.
Gotta admit, at first I was expecting this to be a documentary/show like type of "how brake pads are made" and thought about turning the video off, once I saw that it's not the case, but you really did an incredible job with the video, giving great informations and insides in the whole process of making brake pads.
Guys from NRS are awesome for letting you do this for us!!
do more of this, alternators, starters. a Moog suspension parts thing would be cool.
Am I the only one that noticed that Chris used to be so bluh now he’s so enthusiastic I love it
The little King just noticed that too. So much more energy now
When you get more comfortable on camera your real self comes out.
ChrisFix like the channel dude awesome learning sessions.
He lost weight and a new person as well
Hey ChrisFix!
It is a really professional and fantastic video. You beat other how it's made videos by far!
Really appreciate your videos!
How its made: We show how diffrent things are made
Chris Fix: Hold my Rachet
*Medium Strength Thread Locker
Tom Spark *blinker fluid
@@fearxgods1474 *DIY Odor Remover For Your Car.
*Brake Pad
*soapy water *