Welding in Water

공유
소스 코드

댓글 • 914

  • @sambohr4179
    @sambohr4179 2 년 전 +2670

    FlexTape would seal that boy right up

  • @eastangliantraction1034
    @eastangliantraction1034 2 년 전 +1293

    I swear these guys just went out looking for a pipe to cut so they could show how un-safe they are

    • @ewinrizal
      @ewinrizal 2 년 전 +26

      Electric welding relative safe, less than 45 volt...

    • @xboxgamer9216
      @xboxgamer9216 2 년 전 +7

      @@ewinrizal more over could ve using dc for welding and not ac which makes it more safe

    • @aldenhaul2775
      @aldenhaul2775 2 년 전 +15

      Your amperage ,is what will get you .The voltage is arbitrary . Stupidity ,is then actually thinking it would work .

    • @xboxgamer9216
      @xboxgamer9216 2 년 전 +1

      @@aldenhaul2775 internal body resistance could increase amps and amke it worse

    • @TheeJay11
      @TheeJay11 2 년 전

      Smh

  • @labemolon5739
    @labemolon5739 2 년 전 +675

    It looks like its been repaired before boys, probably a good idea to just shut it off and replace that entire section of piping. Or just plug a tampon in it and wrap it with flex seal...itll stop the flow...

    • @thechonkersking2647
      @thechonkersking2647 2 년 전 +12

      I was about to say they should have sleeved it and welded over is that a feasible fix for something this diameter and pressure? I'm more accustomed to smaller pipe fixes on the barn or machine shed lines at my families farm.

    • @sandyfeister3354
      @sandyfeister3354 2 년 전 +5

      Tampax: when you need to tamp it to the max

    • @firstnlast6846
      @firstnlast6846 2 년 전 +4

      Not how they roll in Chyna

    • @avegaughtastiffy1654
      @avegaughtastiffy1654 2 년 전 +3

      Just shitty products from China

    • @gtbowhunter9086
      @gtbowhunter9086 2 년 전 +5

      Its Chinese manufactured shit, they're gonna keep patching it until it rots

  • @chewybacchus5918
    @chewybacchus5918 2 년 전 +255

    Works on gas pipelines as well👍

    • @michaelfoster3513
      @michaelfoster3513 2 년 전 +4

      Ok lol

    • @shahabmos5130
      @shahabmos5130 2 년 전 +7

      Alot better .

    • @alexmullen8752
      @alexmullen8752 2 년 전 +7

      Especially at night. Hahaha.

    • @delainemaiers6788
      @delainemaiers6788 2 년 전 +7

      @@michaelfoster3513 Look up "hot tie in welding" and banish your ignorance.

    • @chrischisholm6731
      @chrischisholm6731 2 년 전 +4

      @@delainemaiers6788 yup, this guy welds.. union boston guy here. People will just make comments on shit they have zero and I mean no idea about.
      Amazing what you can do welding. Also fucking amazing if you stop pretending you know everything and do some research before you open your fuckin gob.

  • @Jay_Ray
    @Jay_Ray 2 년 전 +176

    “You can weld underwater. I wonder why this isn’t working?”

    • @Tactical_Manatee
      @Tactical_Manatee 2 년 전 +3

      😂

    • @pader4471
      @pader4471 2 년 전 +4

      Cause there is pressure that could split you half

    • @fozman845
      @fozman845 2 년 전 +15

      @@GH-pu9bs no its cutting underwater using oxygen. Welding is same as topside but welding rods have wax coating for water protection

    • @GH-pu9bs
      @GH-pu9bs 2 년 전

      @@fozman845 oh thanks a lot.

    • @danielquinonez243
      @danielquinonez243 2 년 전 +11

      He's struggling mainly to get the arc going and sice it at a molten state the water pressure washed it away like nothing had a similar problem happen when I was working in Wisconsin.

  • @praneshvbm7226
    @praneshvbm7226 2 년 전 +60

    When you qualified by online welding class 😂

  • @okboomer6201
    @okboomer6201 2 년 전 +50

    And then he realizes that it is a jet fuel pipeline.

  • @Dr.Westside
    @Dr.Westside 2 년 전 +31

    So where was the welding ? He couldn't even strike an arc .

    • @TheAnnoyingBoss
      @TheAnnoyingBoss 2 년 전

      Well I'm sure it's not easy to strike an arc on wet metal with a massive stream of water coming out right where you're trying to weld 😂 I don't think I could get an arc on that let alone a consistent weld.

    • @edwardbartoneb
      @edwardbartoneb 2 년 전 +1

      Don’t forget about the power lines that the high pressure water was hitting. ⚡️⚡️⚡️⚡️

  • @Robyrob7771
    @Robyrob7771 2 년 전 +21

    He’ll never close that hole with that volume of water pouring out under pressure!

  • @robertschemonia5617
    @robertschemonia5617 2 년 전 +71

    Reminds me of guys at a muffler shop I seen one time that was trying to weld an exhaust leak while the engine was running, in front of the muffler. The dude just couldn't figure out why it wouldn't weld shut...

    • @chevybigblock3311
      @chevybigblock3311 2 년 전 +1

      No way that happened

    • @ianwallace3192
      @ianwallace3192 2 년 전 +2

      @@chevybigblock3311 I dunno. Auto shop fail videos are pretty ridiculous

    • @bruhroyale12123
      @bruhroyale12123 2 년 전

      @@chevybigblock3311 human stupidity is a real thing. This is why people need to learn a bout vehicles so people don’t screw you over or you don’t screw urself over

  • @monkymonky3428
    @monkymonky3428 2 년 전 +43

    I like how nonchalantly he just went over and started welding

  • @georgiojansen7758
    @georgiojansen7758 2 년 전 +2

    there are special round plates, with rubber seals with bolts on it , mount it next to hole and slide it over the hole. submarine crew are trained to do that, i found one of these in a bin from the water company

  • @viktorgrachev5427
    @viktorgrachev5427 2 년 전 +36

    Чопик - наше всё!

  • @borkingdoggouwuuwuw
    @borkingdoggouwuuwuw 2 년 전 +7

    This person is proof that the human body, can continue to function, long after the brain has died

  • @rahulmukundan1245
    @rahulmukundan1245 2 년 전 +62

    The power lines: I'm gonna end this man's whole career.

  • @asayanyanyanyan5372
    @asayanyanyanyan5372 2 년 전 +1

    これを溶接でどうにか出来るレベルだと思っているのがすごい。

  • @biancaandrade8355
    @biancaandrade8355 2 년 전 +79

    My mind saw the title as “Wedding in Water” 😂😂

  • @mysc701
    @mysc701 2 년 전 +17

    This is the way to keep your feet dry in the water.
    Such a Century Genius.

  • @m.haslam8495
    @m.haslam8495 2 년 전 +23

    There is no way he will stop the leak by this type of welding. Just shove a branch in the hole.

    • @krisvind1715
      @krisvind1715 2 년 전 +2

      This is a big leak, but you can stop a leak by welding, eventhough the water is pouring out

    • @krisvind1715
      @krisvind1715 2 년 전

      @Based Whiteman yes? I have done it a couple of times

    • @krisvind1715
      @krisvind1715 2 년 전

      @Based Whiteman dude tf are you talking about? Why would i lie about such a silly thing? Maybe don't speak of subjects you do not know about

    • @krisvind1715
      @krisvind1715 2 년 전

      @Based Whiteman clearly welding. You might wanna look at this video to see how foolish you are krplus.net/bidio/hsOdm5ZpdYnVk5Q

    • @abaade90
      @abaade90 3 개월 전

      Welding in water live pipeline?

  • @justinweathers3158
    @justinweathers3158 2 년 전 +8

    I like how they show us the water is spraying directly on the power lines. LOL they don't know anything about OSHA.

    • @nicaxiv14jd
      @nicaxiv14jd 2 년 전 +2

      How come the Chinese think they know everything When They Don't Know Jack shtttt. I don't know what they're trying to prove...😑💥🤛🏼

    • @tezzingtonsir28
      @tezzingtonsir28 2 년 전

      So what if the water is spraying on to the power lines? What exactly is the problem with that

    • @dandc2011
      @dandc2011 2 년 전 +2

      @@tezzingtonsir28 anybody ever told you what happens when you mix water and electricity?

    • @justinweathers3158
      @justinweathers3158 2 년 전

      @@tezzingtonsir28 somebody must not have ever seen videos of foreigners and their power lines. I don't think they're well grounded or something because somebody's always getting the s*** shocked out of them

  • @eastwood111
    @eastwood111 2 년 전 +6

    The best part is the water is actually connected to the powerlines as he’s welding

    • @TheSpeederist
      @TheSpeederist 2 년 전

      It's cable so it's no harm. At least it looks like cable.

  • @user-hb2ox3wk4w
    @user-hb2ox3wk4w 2 년 전 +16

    Сосед тоже пытался заваривать текущую трубу

  • @henryespiridion3316

    What kind or number of welding rod ?

  • @hangemhigh8548
    @hangemhigh8548 2 년 전 +1

    I wouldn't call that welding.

  • @steves835
    @steves835 2 년 전 +3

    I love the blue blocker sunglasses he's using. They filter 100% of UVA rays, 85% of UVB rays, and 8.2% of arc flash.

  • @TheHoth1
    @TheHoth1 2 년 전 +5

    Zero F given. I remember I went to a natural spring pool in China and workmen like him were welding away right next to the pool. Absolutely zero F given to any concept of safety!

  • @donovanwise8547
    @donovanwise8547 2 년 전 +1

    Will never hold. You'll be back fixing that in a week

  • @TOADJOEL1
    @TOADJOEL1 2 년 전 +5

    Where is the rest of video....
    Did that works.....
    Please show us more

    • @crazyturd143
      @crazyturd143 2 년 전 +1

      I can tell you unequivocally it did not work.

  • @11SecSTionStockSnail
    @11SecSTionStockSnail 2 년 전 +4

    Plot twist. He’s welding with out welder, water spraying live wires is feeding that electrode

    • @amjan
      @amjan 2 년 전 +2

      My though as well! He is just closing the circuit.

  • @user-jb7wu7xp3v
    @user-jb7wu7xp3v 2 년 전 +11

    А что, так можно было???

  • @joshuarussell2020
    @joshuarussell2020 2 년 전

    Let's see. Electric welder, close to a water pipe that is gushing water towards power lines. What could go wrong?

  • @diysimpleartsncrafts5617

    I don't have a license for welding but common Sense tells me that to put a cover on the whole first then welded it onto the pipe would be much better and safe.

  • @lotlot6058
    @lotlot6058 2 년 전 +7

    Ну судя по тому как там уже насранно вокруг отверстия . Они варить будут ещё долго . И получиться у них ну скажем так себе . Есть отличное средство . Хомут называется !

  • @markdavis9510
    @markdavis9510 2 년 전 +3

    Just close the nearest upstream valve.
    Even children could figure that out.

    • @nathanfenske3980
      @nathanfenske3980 2 년 전

      You don't know what it supplies. Could be less safe to shut off. Even a child would think of that though.

  • @ramudeenamsetty7736

    To stop leaking first close water valve then allow it to dry. Only then attempt to put cello rape or welding.

  • @astromonkey7120
    @astromonkey7120 2 년 전

    Water and electricity perfect combination

  • @thedalillama
    @thedalillama 2 년 전 +4

    This is how they seal the gas pipelines in Nigeria.

    • @coltonwinkel510
      @coltonwinkel510 2 년 전

      That's how they do it everywhere. It the gas is stopped oxygen will get in and your day will get much worse

  • @sushkaize
    @sushkaize 2 년 전 +14

    надо было временый хамут ставить, теперь сварка мешать будет!

    • @ilmizlab9240
      @ilmizlab9240 2 년 전 +7

      Если бы у них мозгов был бы в башке тогда...........

    • @Shareware412
      @Shareware412 2 년 전 +1

      хамут от слова хам?)

  • @Max29xD
    @Max29xD 2 년 전

    Por que no le pusieron un FlexTape 😂😂

  • @kinslerda2121
    @kinslerda2121 2 년 전 +1

    En mi país, primero cortan el agua.

  • @aloha-rob
    @aloha-rob 2 년 전 +36

    SO F'IN DANGOUS BRO!! Please use flextape!!

  • @PZ-hu8ox
    @PZ-hu8ox 2 년 전 +42

    Под таким давлением ты даже дугу не в состоянии зажечь , о какой сварке речь!? Хотя это индусы , у них вся жизнь как в кино , что ни удар - то попадание 😂🤡

    • @user-ro9th2hb6b
      @user-ro9th2hb6b 2 년 전

      Он туда гаику наврит потом болт закрутит

    • @AndresIvanovii
      @AndresIvanovii 2 년 전

      🤣😂🤣 жесть , ну видишь чё то пытается..)))

    • @user-fh6km6gb7n
      @user-fh6km6gb7n 2 년 전 +3

      Китайцев с Индуссами перепутать. 🤣🤣🤣

  • @nathanc4849
    @nathanc4849 2 년 전 +1

    Hopefully those cables are telephone wires not power 😬

    • @bankmalki
      @bankmalki 2 년 전

      Yeah, that was my thought too...

  • @sergiomarcos232
    @sergiomarcos232 2 년 전 +1

    Pelo que eu entendo de solda ele não fecha este buraco nunca kkkkkkkkk

  • @benbig2048
    @benbig2048 2 년 전 +8

    можно только вокруг наварить, какую нибудь задвижную арматуру..
    а это шапито

  • @ps_lol
    @ps_lol 2 년 전 +3

    Fun fact : about the water gets whole over the place and the water is about to go rain

  • @johnf8748
    @johnf8748 2 년 전

    Would hope power lines are off or will have two things arcing

  • @user-cs8iz2in7i
    @user-cs8iz2in7i 2 년 전 +2

    Даже трубу со стоячей водой не возможно заварить. Пар всегда будет мешать.

  • @bennieleija5846
    @bennieleija5846 2 년 전 +3

    When young I was hired to repair something very similar.
    I used a 4” coupling with a swage reducer and a valve. I set the coupling on pipe the welded out. After weld I screwed the swage and valve on. Job complete

  • @user-ox9ij8hu8r
    @user-ox9ij8hu8r 2 년 전 +25

    Он походу до сих пор её пытается заварить

    • @user-6x6truck
      @user-6x6truck 2 년 전

      На счет него не скажу. А вот я б заварил..

    • @Abalk404
      @Abalk404 2 년 전 +4

      Просто электроды сырые

    • @user-fc6rt6db5w
      @user-fc6rt6db5w 2 년 전 +3

      Тут прикол не в том что варит под давлением,а в том что вода бежит на провода под напряжением.

    • @user-6x6truck
      @user-6x6truck 2 년 전

      @@user-fc6rt6db5w они в изоляции

    • @zov640
      @zov640 2 년 전 +1

      @@user-6x6truck ну специальными электродами и он бы смог

  • @sang9479
    @sang9479 2 년 전

    Welded particle will go away by pressure. So first shut the valve of both side.

  • @robertspikes1376
    @robertspikes1376 2 년 전 +1

    Just trow a banded coupling around the pipe slide it over the hole and tighten with an impact. Its gonna soak you but it can be done. Or use a half pipe, a piece of rubber, and 2 chain clamps with 1 1/2 socket on your impact. You'll be done in 2 minutes

    • @mattboyd9591
      @mattboyd9591 2 년 전 +1

      Yeah throw a smith blair wrap on it be just fine

  • @user-og9yj1hi6j
    @user-og9yj1hi6j 2 년 전 +7

    Сомневаюсь

    • @Ion-777
      @Ion-777 2 년 전 +1

      Если бы не зашёл почитать коменты, думал бы что так можно

    • @user-6x6truck
      @user-6x6truck 2 년 전

      @@Ion-777 а так можно, поверь

    • @user-6x6truck
      @user-6x6truck 2 년 전

      @@Ion-777 сложней запаять медную трубу под давлением, а заварить стальную легко

    • @user-od4zo6mu5z
      @user-od4zo6mu5z 2 년 전 +1

      @@user-6x6truck Под таким давлением не реально.

    • @user-6x6truck
      @user-6x6truck 2 년 전

      @@user-od4zo6mu5z из-за большого разрыва кажется давление большим, по факту килограмм 5 максимум. Заварить можно

  • @brentlsturgeon
    @brentlsturgeon 2 년 전 +4

    The realm of covid and questionable meat is back with its craziest sequel yet in their latest movie, 50 weld sticks and a water jet. The excitement, the thrills the chills the possible death by electric shock!

  • @buddyogun2247
    @buddyogun2247 2 년 전

    Worked very good

  • @Twin_solo_az
    @Twin_solo_az 2 년 전

    They just need Flex Seal.

  • @Stopstaring101
    @Stopstaring101 2 년 전 +3

    My mother’s mouth whenever she gets ahold of some juicy family gossip 🗣

  • @Moriarty2007
    @Moriarty2007 2 년 전 +6

    Воду перекрыть явно не в их силах...

  • @user-ft4oe7go7g
    @user-ft4oe7go7g 2 년 전 +1

    危なすぎるし、溶接出来たとしても穴だらけになりそう

  • @emgee8483
    @emgee8483 2 년 전 +5

    The legend says he is still trying even nowadays...

  • @wheelsondemand.
    @wheelsondemand. 2 년 전 +6

    മലയാളീസ് ഉണ്ടോ 🔥🔥🔥🔥

  • @bwma
    @bwma 2 년 전

    Guess they never seen a stainless steer saddle patch before.

  • @makaveli1871
    @makaveli1871 2 년 전

    Legend has it the pipe is still broken and shooting on that Chinese guys house.

  • @user-hq8ie8fz5q
    @user-hq8ie8fz5q 2 년 전 +5

    Говорят досихпор варит

  • @RockMonger
    @RockMonger 2 년 전 +4

    Yea because today water pressure isn't a thing.... have at her boys... ill be back next week to see the progress....

  • @pcakes1878
    @pcakes1878 2 년 전

    weld on a collar with an open shut off valve

  • @user-gs7oq6ix6r
    @user-gs7oq6ix6r 2 년 전 +2

    Можно часовую версию сварочных работ?

  • @Tactical_Manatee
    @Tactical_Manatee 2 년 전 +3

    Yoooo lmao that is wild 😂 I wonder if it worked for even a little while

    • @angelcrush3320
      @angelcrush3320 2 년 전

      it can't have worked 😂, it's dumm that they even tried without shutting the water off first.

    • @angelcrush3320
      @angelcrush3320 2 년 전

      it can't have worked 😂. it's dumm that they even tried without shutting the water off first.

    • @angelcrush3320
      @angelcrush3320 2 년 전

      it can't have worked 😂. it's dumm that they even tried without shutting the water off first.

    • @angelcrush3320
      @angelcrush3320 2 년 전

      it can't have worked 😂. it's dumm that they even tried without shutting the water off first.

    • @angelcrush3320
      @angelcrush3320 2 년 전

      wow my internet lagged out and now it postet 4 times, neat

  • @noodlex4669
    @noodlex4669 2 년 전

    This is actually what rain is

  • @577917
    @577917 2 년 전

    No faceshield, No Glouse , No proper earthing and water sprinkle over live wire ..Safety buried RIP safety

  • @everettsykes1774
    @everettsykes1774 2 년 전

    That diameter pipe is a trunk if a mainline, so a shut off valve should be close enough.
    Why didn't they use it?
    I was only a pipefitters for 27 years but I know a little.

  • @motherofallemails
    @motherofallemails 2 년 전

    Bolt-fastened steel strap, pop to the side, bolt and slide across, then tighten. Simple.

  • @forefatherofmankind3305

    The force can easily peel off your skin from your bones

  • @deancao8747
    @deancao8747 2 년 전 +2

    特殊なテープを使えば、一瞬で留められるのに

  • @eporter5071
    @eporter5071 2 년 전

    They should probably have put a shut-off valve somewhere...

    • @destinhook3826
      @destinhook3826 2 년 전

      Worst part is there is a shut off. They’re just accidentally showing how not do it.

  • @majorpain7248
    @majorpain7248 2 년 전

    I’m amazed the water didn’t conducted current from the pole wire white he sparked away while the water touched

  • @Abhi_14789
    @Abhi_14789 2 년 전 +1

    Scary that the water is directly touching electric wires and this guy is Welding

  • @dhirmer
    @dhirmer 2 년 전

    Notice how they didn't show the final product. That's because the pressure of the water will blow the molten metal out and the whole will never be filled.

  • @karansb
    @karansb 2 년 전

    Yes if u use a rectifier and use 7018 electrodes this is possible.

  • @Q_20
    @Q_20 2 년 전 +1

    Does this actually work? It seems highly dependant on water pressure and temperature

    • @johndon3782
      @johndon3782 2 년 전

      Yeah fuck it, just fill the gap and grind it 😆

  • @daniellecarpenter135

    That's not gonna work. Shut off the water if possible and then try welding the patch?

  • @mamtasahu9153
    @mamtasahu9153 2 년 전

    Why wouldn't they turned the water off, see how much water they are wasting

  • @user-hp1bx4yp3o
    @user-hp1bx4yp3o 2 년 전

    Вода бьет на электропровода , и они в воду лезут ,

  • @alextaylor8218
    @alextaylor8218 2 년 전

    You see, as an aspiring welder, THAT WELD GONNA BE SHIT! Stick WELD electrodes can't be wet if you don't want to redo it when it inevitably cracks again

  • @JMacho-zk5dt
    @JMacho-zk5dt 2 년 전

    Thank God for Americans.🇺🇸🇺🇸

  • @sudhanshushekhar9770
    @sudhanshushekhar9770 2 년 전 +2

    Probably ..a suitable fountain 😎

  • @tonytelleria1870
    @tonytelleria1870 2 년 전

    It only took second to fix it in the USA it would have taken three weeks 😂😂😂

  • @RdAudi
    @RdAudi 2 년 전 +1

    Flex seal should do the trick

  • @natashamassie6268
    @natashamassie6268 2 년 전

    Just shut off the water and replace that section of the pipe....

  • @Yamesy
    @Yamesy 2 년 전

    Flex tape would have worked just as well

  • @errorsand6950
    @errorsand6950 2 년 전

    You should probably tell the city for the problem so they can hide the pipe

  • @gladiator_muslims
    @gladiator_muslims 2 년 전

    Is water pouring on electric lines
    That's a way too danger boys

  • @martiesrcsstore4049

    Anyone else see the water hitting the power line above lolol that's scary 😨

  • @Vaas_Pirate
    @Vaas_Pirate 2 년 전

    Shouldn't they cut the water supply in the pipe and then fix the hole? Because only an idiot would do this with the water coming out

  • @dimagrey1967
    @dimagrey1967 2 년 전

    А газовую они так же сваривают?

  • @basst.4738
    @basst.4738 2 년 전

    This is really awesome. You showes nothing. But you sell it as thing.. Awesome.

  • @xxTheMuffinManxx
    @xxTheMuffinManxx 2 년 전

    You showed no welding... just leaking water

  • @user-yd5kd2gr1u
    @user-yd5kd2gr1u 2 년 전 +1

    Походу в трубе единорога вырезал, дочка попросила фигуру из воды в воздухе, для фото в инсту.. Самый лучший папа🥳

  • @trevonball3278
    @trevonball3278 2 년 전

    We weld pipe shut that have gas fumes in them and flames shooting out the side

  • @edwindivinagracia4120

    You can't do it if there is pressure as what we have experience during our vessel grounding and makes hole on the bottom.