10 BEST INVENTIONS FOR YOUR GARAGE

Product description: "European advanced technology"
Name on the lift: "xinkong"
Sounds legit 🤣

I'm a retired heavy truck mechanic. I build rat rods and hot rods. I still use the floor jack and jack stand method with no problem. There are many lifts and other things out there that would be cool to own but the cost for the home hobbyist makes this one made in Denmark a bad investment due to the cost. My guess is this lift is 5 figures. Achon won't provide online pricing but i found a similar lift that has nearly the same spec's sells for $22, 700.00. Not exactly for the weekend warrior that works for a living.

The BluCave system is extraordinary.

let's appreciate the brains and creation of such tools and devices. And realize that it is all worth the price and show appreciation to the people who took the time, energy, and wisdom to make the tools and equipment. They are priceless. And we should understand that the price is more than worth it, l am sure.

I have one of those induction heaters. They work really well and save a LOT of time. I have a floor mounted strut compressor which also works very well. That one is nice and portable though.

Check your ball joints with a shovel: Jack up the lower control arm, close to the ball joint, so tire is approx one inch off the floor. Slide a spade shovel under the tire and pump up down. Do 9-3 check with your hands. The weight is off the ball joints and makes moving the wheel easy and you can hear/see if they need replacing. The shovel is a lever. Set your camera under the car to see the ball joint movements. I have a 89 Mercedes 560 and works just fine...😀🤔.

half of these seem gimmicky, the others are too expensive

4:35 - Doesn't seem practical, you would need multiple tools or heads for each lug pattern. This one has a specific 5 lug, fixed pattern.
Won't work on 4, 6, 8 or other 5 lug patterns.

I do like the idea of the safety pins. Although when the threads sheer off and the spring flies out those tiny metal strands probably won’t do much. But it did make me feel better while watching the video.

Since I am a mechanic myself I will be honest a lot of this is very impressive but the process is just hard to deal with honestly but it's nice to see that people are still innovating on to the mechanic field since everything is now gonna be electric soon enough And by the way I'm from South Carolina so how are you all do one lol there aint no fun if I don't put my country in it and that Yahoo just kind of does it by the way text zone you do a great job on your videos I watch you every day different videos I'm going from your very 1st to up-to-date I love everything you do man cause I'm in the EDC and everything else like that It's just great to see somebody who looks out for the innovation of everyday people that should be spread world wide

1:48 I don't see how that reduces work time by 40%. A simple plug takes any shop from 15-30mins (depending on what is involved, of course). That looks like it takes an hour or longer.

Wher can we purchase achon scissor lift. Thank u

The powerbuilt if people complain about scratching the shock springs and related parts, I would recommend coming up with some rubber boots on the contacting surfaces of the powerbuilt, so not only it removes the complaint, but at the same time it adds value to the product.

9:00 So it's basically a pneumatic Pearl of Anguish. Ouch!

The body shop lift & puller was the best.
I remember lugging the old heavy wheeled cross elbow frame and body pullers around the shop. If they slipped sometimes while a hydraulic chain puller was tightening : your life would flash before your eyes like a bomb went off.

As a mechanic, i would never use any of these expect the alinement machine and maybe the induction tool. But even then nothing beats a oxy torch

Y’all should put x4 of those scissor lifts together at same time for pick up trucks and heavy vechiles would be more stable and prevent tipping .

Wow. This did not go as I expected

Pls do more stuff like that! Never miss the new uploads

That 5 socket lug adapter would only work if each lug was put on by hand exactly flush. You would still have to tighten each one individually to be certain one won't come loose.

Most of those are good in theory..not so much in the field x)

That lift though 😳😳

5:40 similar tool I have. It’s just coil heater to water, for 8 $, and it actually works on rusty screws.

That last one is definitely a winner it's worth every penny and I've got an improvement for it if you would like to get ahold of me you can chow for now

There was maybe one item in this video that was practical as far as cost and effectiveness. There is already low cost procedures and tools to do the same things that all of these gadgets did. But as marketing goes, when you're selling worldwide there's always enough people to keep you in business buying your product you don't care how much something cost and haven't really ever used the tried and true things that are used every day for pennies to a couple of hundred bucks.

REGARDING THE LIFT,,,Those have been around for awhile, last dealership I was @ 9 or so years ago had them. They R kinda hoky not friendly to most vehicles, BUT it works & would be great for a home.

Was that an engine hoist on the lift it self? That is stupid dangerous.

I would spend my money on any lift that doesn’t let me remove suspension and drop a gearbox/transmission.

Excellent

You didn’t mention anything about the equal lifting synchronization

Thanks for sharing your amazing video. Good work my friend. 👍👍.

Cool that kind of gadget

I can’t understand why someone would design a coil spring compressor that needs to be operated while standing in the firing line if something goes wrong.

Excellent my friend. I'm actually interested in a couple of them. Take care and stay safe.

Everything seems extremely overpriced 😂

Why not use the old school tire plugs it's worked for years

I need almost everything in this video.

I have used the power built spring compression tool. It is crap. I used it as a rental tool. Nowhere on the box does it give a capability rating. They say 4000 lbs, but what does that equate to in relation to a spring? I used it on a set of F-150 struts. The aluminum shaft on the tool bent and would not fully retract.

into the success of these small

Get well soon ☺️

i cant wait to strip all 5 of my lug nuts at once cause i didnt start them by hand!

none of these go in your own garage, this the kind of thing you find in a big time shop. but maybe that strut tool it kinda nice

A lot of these tools take up room and take more time to set up looks like.

Amazing stuff.

Pointer: put the damn prices on screen.

nice to see what everyone else is doing . what are we producing the the USA ?

The one most interested in is the ACHON DSL3500 lift but there was no price, Their website does not list a price either.

Wow Great Stuff Thanks

Cool content

Impressive!!

Great vid, keep it up guys!

Where are the emergency locks for that scissor lift system? No thanks.

cool how pretty much everything is rated at around 7700 lbs😅

I would estimate that I would do a puncture repair in a quarter of the time with a patch.

this is an interesting thing

7:10 All these tools look pretty useful. But I don't think I would trust this. I'm probably wrong, but by looking at it, I think one bump would tip that thing over in a second.

5:43 What shop does Jonah Hill work in?

I want that car bench UL 300

These prices are kinda of High and fast and efficient is more practical, Most of these tools take up too much time just to set up.

Good

Sad that all of these products are available overseas......Nothing in the US?

Не подходит подъемник,двигатель с передней частью машины прогибается вниз после первого подъема.

$2700 for a tool to fix Windows ! You can buy a kit that WILL fix a window for $15-20 . It works fine I've used them 😆

That multi wheel nut driver is probably that hard to work that tiny cordless driver seen in the video can’t do anything if the nuts have been tighntened. They use that tool in car factories where they must do it fast. But probably the car retailer needs to check the moment before the car goes to the new owner.

Did you know Denmark used to be called Danmörk?

😍

Why would you show stuff that is not easily available....I wanted the Bluecave system....Good luck

how a good tool

All this stuff is either wildly over-priced, or impractical because of its limited use.

10 Lachnummern

Start a line of random stuff

Is your health ok?

All a bunch of gimmicks - most of which have been used in real Dealerships for *years.* That "NutRunner" (LOL) thing would be smart if you had an absolute top of the range SnapOn/Mac Cordless Impact gun - otherwise; *Not a chance* without air. I will say the "drill snake" ordeal to clean sunroof drains & the likes *is* brilliant though.

$450 for a machine I can use a $25 dryer vent cleaner for?

At 4:23 😂😂😂😂😂😂,Been in the motor trade for 40 years and seen some useless tools and ideas, most being impractical and would last about 5 seconds in the real world, but that bit of rubbish is up there with the worst!

Moat of these are solutions looking for a problem.

why didnt put the cost of them

Tools from the past...

“experts” advise you , means they want to sell you something

I am not a mechanic. Ive done a few back yard repairs but yeah... i really know nothing. I would like a mechanic to tell me why at 7 min 56 seconds the gentleman is using this hoist to pull at one of the hood supports with a chain. Am I an idiot or is that not a point where you would attatch to any kind of support structure? Also am I an idiot or is the support structure for the hood not something you would need a chain and hoist to remove...

$15k for an alignment machine for "my" garage. Does the author differentiate between home and professional garages?

$450 for a tiny drain auger? Yeah, ok.

✝️😇🔯🕊️🐑🧄💡👽🔭🎇🦅🇺🇸🌎🌠🪐🌏🌠🪐🌍🌠🪐HolyPsalm91 Jesus and KathrynMiller say Thankyou for sharing ✝️🤍✝️🤍✝️🦅🇺🇸🍀🍀🍀

4:35 this tool is trash all the way around. only fits 1 pattern. 2 you'd need to buy 5 of every single lug nut socket in order to use as a mechanic and still only works on a specific 5 lug (as the distance is not the same on every vehicle. so waste of time and money. 3 using this with the nuts in the sockets is a sure fire way to cross thread them. you never use an impact to start any nut. 4 unless it has some kind of slip built into the gears if 1 of the bolts doesn't go on easy it will seem like they are all tight instead of 4 being hand tight and one rusty pain in the ass. also if they used these in the factory i'd be unimpressed as the computer running them would have no way to monitor the actual torque of each individual nut. 1 being tight would make them all tight. as stated above the opposite can be said if it did have slip in the tool. If 1 stud was stripped and just spinning the tool would free spin on 1 and not move on the rest. just like a one wheel wonder rear end.
really sad it's completely not thought out and so don't waste your money on that.
5:40 this looks like a great tool especially for people up north like me as snow and salt makes everything rust up to become a serious pain...... however the price is the real issue i see. $650?!?! I recently bought a 110v heating coil for $50 which heats 600 gallons of water to 85 degrees F. So just making the coil the size for a nut, and putting a trigger on it doesn't make this a $650 tool. If it actually heated up a nut enough to make a real difference in 15 seconds and had a good warranty i would probably buy this for $200-$300. As it stands now i'd rather keep using my torch.
As for these scissor lifts they are seem nice for a low height ceiling and most of the time cheaper than an actual lift. however everything goes bad some time. and i didn't see or hear any type of saftey to keep it from dropping instantly when one of the hydraulics goes out. If you had your arm in the scissors area... well it's gone now. unless you were lifting up a truck and randomly laid down flat without it bouncing and crushing you.... cars would be most likely fatal if working near the front end. so not really in it for me without more detailed information on safety and price to compare just using a lift or a jack and jack stands.

First and thanks

👍👍👍👍

LMAO that automotive drain line cleaner for $450.00 has to be a joke. Just go buy some weed-wacker line under $10.00 and clean your lines out without breaking your wallet.

Also ich kann ja nicht so viel Englisch aber das habe ich verstanden bei dem Akkuschrauber mit der reinigungsspirale wie viel Geld das kosten soll
Das ist natürlich Quatsch das gleiche System gibt es auch für rauerreinigung in verschiedenen Größen ich habe 25 m auf Spirale für 30 €also der Preis hier scheint nicht mehr berechtigt zu sein.

Never ever ever use a scissor lift.......EVER!!

prys ?

⭐⭐⭐⭐⭐⭐⭐

9:41 cv boot expander china edition price is $81.48 at Ali express

If you're going to try and sell your merch in this country I'd suggest also lisling details like pounds and mph. Many people like me are not going to take the time to convert KG and MM,

Huh. I am unemployed again. You think I am made of money. Heck no!

My doctor used the same tool to clean my prostate.

Metric system? 7700 pounds?

just copy'n'pasted some bold marketing claims huh? e.g. the nutrunner wont be suitable for most wheel removals as the nuts operate at 1/5th of the torque... try to find a drill that's powerful enough first 🙄

Where are these products made? I don't want any made in china junk.

This is what I just watched:
Drill a 1.5 inch hole in the steel cords of my tire and fill it with rubber??
A 99 cent store drain cleaner snake wins SEMA?
Buy a massive air wrench so I have enuf torque to break loose 5 lugs at once?
In 15 seconds I can heat my nuts red hot destroying the grade 3/5/8 temper, better get new ones!
Put stretchy boots on my cv joints and trap in all the dirt because it is quicker than doing it properly.
Lastly you can't test/inspect/show ur customer worn out suspension with the weight of the vehicle on the joints.

This video is from 2013 lol the stuff is not even available anymore.