How to Install Dual Brake Calipers

This is why I turn my notification bell on for your channel. I know you put a ton of work into your videos but wow dude, I am not sure who else saw how clean the suspension looked, all the painted parts, the calipers, etc... You go way above and beyond and that is why I love this channel! Your attention to detail is exceptional.

I came out of curiosity to see what a dual caliper setup was, I left learning how to fix a rear axle seal that I really need to fix in my car. Great video as always.

It must be so funny watching you film, "Now we're gonna go from this..." *four hours later* "...to this*

Dual calipers are also a lot smarter than tapping into the existing rear caliper lines. You don't risk losing all your brakes if something goes wrong.
Also in some countries it's just plain illegal to modify the existing braking system, so this standalone system gets around that which is awesome!
Thanks for all the effort you put into your videos Chris!

Awesome, legit, you are by far the best teacher, instructor, videographer on car mechanics.
Attention to details, clear & precise voice, no shakey camera, but most of all your humble & not conceited.
Great work & honestly you should be teaching automotive repair classes. I think you would definitely succeed in everything you do. A master to most but a student to all.

I'm not even considering mounting dual brake calipers, and still I ended up here. Watching the entire video. Hypnotizing. :)

My Favorite Mechanics
1. ChrisFix
2. ChrisFix
3. ChrisFix
Sorry I'm tired of typing ChrisFix but he is still the king .......

Can i afford this? No
Did i need this ? No
Did i watch the entire video? Hell yes
Hotel? Trivago

Thanks everyone and I hope you enjoyed the video!! You can find updates on my social media to see when videos will go live and what is up in ChrisFix land.
Instagram→ instagram.com/chrisfixit
Facebook→ facebook.com/chrisfix8

I don't even own a car I just like watching this stuff

Anyone else thinking "I just learned about another part of my car that can go bad."
It's a quite a miracle that any car stays on the road for over 6 months with all the parts that have to stay kosher.

1:51 "all that using common hand tools"
5:53 "it does require a set of specialty tools"

I admit I never seen a dual caliber setup before. Most would simply go for a single fixed 2 piston upgrade, but a dual setup is new to me. Very informative.

who else watches his vids just because you r interested in cars and dont have car or dont need help?

you are one of the few youtubers that explains exactly how to do it, step by step! I liked your video. these are the videos you always want to find when you need help! Thank you

went into this thinking "I don't need dual calipers" to "so that's how you replace those bearings"

The level of detail and specifications that you give in each upload are well appreciated. I cant express enough how much your videos help me to fully understand the process and the correct way to attack an issue. Thx man 👍 couldnt do it without you.

I just found your channel. I really like your clear, confident, professional speaking. you earned my sub, saying alto because I'm a Honda guy ;)

I started out watching how to clean an engine....but this how to clip is insanely awesome...an average guy like me can get into the gear box...change the differential oils...change the bearings...even add dual brakes if I wanna...crazy!

I like how he diassembled his whole suspension to paint it for 5 seconds of footage, now THATS dedication

I dont have a RWD but now Im a mechanic. thanks to KRplus. very informative!! no mechanic can fool me now.

ChrisFix add soapy wooter for extra brake power

This is a very common solution!
Thank you for such a detailed description.
The key point is to find a faceplate for your car or draw it yourself and order production.

It's amazing something so small holds your axles in. I have never heard of a C bracket before. I will hopefully never have to deal with something like this but it is cool as hell to see....

I have many subscriptions. But out of all em. yours are the ones I only wait eagerly for. the amount of hard work you put in phenomenal. I pray for your success and may you reach unimaginable heights.

This has to be the best DIY car channel on youtube.

Learned a lot by watching this video - great step-by-step process on how to install and service the rear differential and installation of new calipers. Thank you for sharing!

can we just thank Chris how he teached us and told every single step...Thank You Chris!!

I'm a simple person. I see a ChrisFix video in my notifications, and I click like. Then I watch even though I have no car

Wow! I have been watching your videos for a long time and just wanted to say good job man! I learn so much from you. Which helps me make more money. I love how professional, clean, and detailed you are. Also, its not easy to keep someone watching a video for 15 minutes and be interested the whole way through. Amazing job man! Thanks for the entertainment and information!

As a kid that's about to get a new car I want to thank you for these videos. After I watch these videos I feel so confident and that I could fix whatever goes wrong. My moms van actually need new wheel bearings (if I remember correctly) and it was when everything needed maintenance on her van. So she had to pay way over $1,000 for all the stuff that had to be done. Now seeing this I feel like I could've done it for a less.

Chris, you're really amazing, we appreciate your devotion

I have no need to do 99.9% of things you show in your videos, but they are so well done, and interesting, I watch every one of them all the way through. Excellent job with your videos!

10 minutes in and I’m completely dumbfounded by how amazingly well you cleaned the diff. Insane, great video man, will be doing something like this very soon

What I can appreciate is, the man uses basic hand tools to prove anyone can make repairs, save some money and learn something along the way
Great content Chris Fix

I love you so much bro. I admire your work and knowledge about car mechanics and incredible attention to detail, and I wish I knew just as much as you know about cars as well as working with cars because this is my passion. I love your videos and I’m always glued to your videos. The more I watch them, the more I learn. Bless ya. ❤️

your tutorials are really high quality. great job!

The planification and edition of this video is flawless! Great work!

Chris, this is the first video I watched from your channel and already subscribed. You have done a great job explaining step-by-step guide of each part and that is of much help for people who are learning.
Thanks! ;)

hey Chris! I just wanted to thank you for your videos, which encouraged me to take a 2 year mechanics course. I just passed the first module which is introductory, and now the second module is about brakes...I had no idea about all the physics involved and math formulas like calculating deceleration...anyways, thank you again and keep it up man!

you were good in the beginning Chris but now you are simply the best at video production. I wish you delved into more intricate projects like engine building, manual trans repair etc. maybe get a cameraman ​for those big gigs. but it's nice to see how popular you've become in such a relatively short time. Hard work definitely pays off

Why the hell am I watching this? I don't even own a car and it's 12pm..... xD

You are crazy good with your car. I appreciate someone that loves there vehicle as much as I do. It's just not a vehicle, it's what drives your life. I'll keep watching.

All I can say is EXCELLENT !!!Happy you included the dual brake part for those of us that just wanted dual calipers.

gotta wait for that 1080p ;)

I don't own a car, I am 14. I don't drive or work on cars. Yet every time I see a new video I stop what I'm doing and start watching it till its done now matter what happens.

Hi Chris I truly enjoy your teaching videos. Before putting the axle shaft back in - I would clean the shaft area where the axle seal would normally be. A ring of dirt could be around the axle where the old seal would be and could cut the new seal causing leaks.

Solid tips and instruction here. I have been watching and referencing you (well made) videos for years.
Keep up the good work, Chris
👍

Love your videos dude, I might never repair my own car but I learn a lot just watching you disassembling and reassembling everything. You're the best!!!

Wow, I just gotta get a duel rear braking system. Your videos are on point

man i love your videos so much. I learnt more about cars in 3 days watching your videos than ever before. I love the mechanical details you show. Thank you!!

I like the atention to detail, the way you clean the components and the paint them... I usually do the same when i work on my trucks. that is what separate the average guy to someone who likes to take care of their vehicles. nice job man .

I’m glad you started this channel! Great videos! Did you ever make a video on how to measure rotors when they are out of round, or warped etc? Plus, did you ever convert drum breaks into disk on that project car that you had? Thanks!

Always use lubricant while driving your bearings in.

Found this while researching how to fix a leak in my Toyota Prado diff.
In my case the diff is leaking at the input shaft.
Liked the methodology. Solid.

Love your Channel Chris! I just do the basic stuff but love seeing these projects--just for interest and learning.

0:34 is the clearest view of Chris fix that we’ll ever get. Just noticed that rewatching this.

Chris, do you think you could leave a link to your magic snappers in the description? It would be really helpful.

Hi dude, i am a new subscriber, all i wanna say is, apart of your attention to detail, the way you explain makes me feel like i can do it now with no fear. Awesome work you do, thanks for those videos.

Can't recall seeing of a better KRplus video: to the point, clear, concise, useful and essential tips, very well put together. Cudos!

Videos like this is why I have post notifications turned on for your channel!

He made it seem sooo easy....

Man I wish u were doing these videos back when I was an apprentice. My manager didn't show me shit and all I learned was from other mechanics at the shop and just trial & error.
Ur doing an awesome job bruh ! Keep it up👍🏼

NEVER IN MY LIFE OF 29 years have i seen such an amazing DIY and so helpful jesus i’m super happy i subscribed i wish i could subscribes another 10 times ur videos are amazing dude thanks

Ik you probably won't see this since it's from a bit ago, but Im in a terrible place rn and severely depressed but your videos actually calm me and inspire me! Your always so happy and positive and you put sm work into these vids. All in all thank you so much

I can smell the diff fluid through my phone

Thx for the vids Chris watching these has taught me so much I was able to help my dad work on his truck alot

I am definitly never doing that to my car but it is so entertaining to watch your videos. Cheers!

Great Video ChrisFix, very detailed. Cant wait to see your drum to disc conversion.

Love this channel. Great vid, Chris!

Good morning Mr. Chris fixed it on a say thank you your videos have been very helpful I am currently trying to convert my S10 extreme into a drift truck. I've watched your hydro break installation video about 10 times and your dual caliper video about 10 times.

Hi, dude, every work after your explantations, it starts looking simple and easy, or at least very clear. Thanks a lot.

Why I love your channel! Straight to the point.

"Always use lubricant"
Always good advice

I've saved thousands of dollars doing repairs in my cars my self just by watching your videos. Thanks

I specifically love to see your videos because of your easy teaching ways

Does anyone else want duel stock calipers now?

hey that was a really great tutorial, can you make a tutorial how to convert the rear drum brake to a disc brake if its possible?

i got a sn95 and i'm currently converting it to a rally car and am loving these vids

Love your videos, how do you always make them so helpful and precise?

Hey man I appreciate the vid it helped out a lot thanks

Loving your videos keep up the amazing work! I'm super excited about the DriftStang project!

This guy is really good, learning a lot of things from him, wish he was in BC somewhere

Really cool idea, not just for drift purposes but aesthetics as well.

12:52
Top Tip: Before you put the brake rotors on they use a oily coating to prevent rust on the box of the container. Oil and Brake don't mix, So spray down the entire surface with Brake Cleaner, or your gonna contaminate your brake pads and your brakes won't work properly. Your also spraying Brake cleaner on the other side as well (That includes drum brakes)

Your vids are incredible you show the behind the scenes of cars

I love the way he shows how to install everything I mean he could buy a air freshener and probably do a how to install love the vids man keep it up

This video is great! Thank you for ALL of them! The best of the best!!

WOW... that little C Clip is the only thing holding the axle in?

Best SN95 how to videos on KRplus.

definitely Chris Fix's channel is one of the best by far!!

Woow, nice video, thanks a million times for this modification procedures and it so helpful for everybody.

5:09 you're telling me that tiny thing keeps my entire axle from sliding out!? Holy moly that is a lot of faith in a piece of metal

Lmao i remember when i was little my dad was changing his rear brake callipers but he had the emergency brake on, then he was getting frustrated, he soon realized like an hour later 😂

I learned so much from your video's and they are very entertaining as well!

The finned diff cover looks so much better. Watching all of the mod videos in a random order, so I get to test my memory in the process.

YO where did you but your dual caliper brackets from??? I'm trying to do the same thing!

also part of the vid could double as a axle change video. many people do four to five lug conversions on Mustang & would like the info on axle removal. thumbs up

Really good video. I don't even own a Mustang and I watched the whole video. Thanks

I learned so much from your videos people Can see you put alot efort into your videos so thank you for putting that efort into your videos